9651
-
Posts
2,477 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by 9651
-
-
-
only with a UDL code to stop you connecting via RSS
-
And what happens if you accidentally not knowingly fudge the programming on your alarm, it then doesn't work as intended, who do you blame then?
Why do you need the engineering code if its maintained by somebody else?
-
We have a fair bit!
Think of one 2500 with a good 70+ biscuits at a guess
-
they can come back and sort it, i aint getting involved with that, could see all sorts happening, projector dropping when switching on lights and all other types of *****
-
that'll do me
This place if fully networked, cinema rooms/xbox etc and all the lights are ran through it too. They only want the back lighting on all the smart light switches turning down, probably a simple job, they asked the question on the way out, so i said ill find out.
-
Anyone know much about it?
Customer has an existing system, wants the light switches backlight dimming down. Looks like its all registered to the dealer, and therefore locked down?
Just want a bit of background before i tell him not interested/cant/dont want to do it
-
Hot around a dozen now. Had one fail today
Got a few UDL (just not actually used it yet, need a play first)
Half are on SIA with Galaxy2. Seem ok for the price point so far.
-
Just installed an 88 with about 30 richocet devices, went well, learnt everything in, left the lid off the expander whilst on site all day, security of the mesh was all green, good to go. Been in for over s week with no radio issues so far. Theis was also with external wireless detectors.
-
i fit stack loads of it
whats the issue?
-
When doing it via dhcp then making the dvr static there is normally a reverse option in the router?
Me being a numpty would have thought the router wouldn't hand this out again as its been reserved in its settings?
on most I put it outside the table , but curious about the above?
-
sometimes some HH are like that,
Ive noted that though as i might have to go back to a talk talk in the next month
-
So here's a senareo recently and a warehouse with a row of sky lights. An ax 70 would have been ideal to mount high up to supplement the detection on ground floor. Couldn't fit any as not graded, is this correct?
-
iirc beams at still under bs not en yet under pd. The argument is a g3 device needs rear tamper and i dont know of one with a back tamper. Ade is better on regs in his head than me, id need to look at current pd
I was under the assumption there wasnt any graded beams available
Bit like you cant get a g3 chubblock?
-
I tend to use either or depending on the door.
A classic roller shutter with the lip at the bottom i'll nut/bolt. The new ali type i'll use a self tapper bolt.
-
yes
g2 yes
Who by? I'm sure optex dont?
-
also is there such a thing as a graded active beam??
On a few compounds we do, seperate group, keyholder only. Ive even got one running optex rednets on seperate channels per beam. Works well
-
Hub reset and someone not telling you?
others are still open as i can still dial in, just the audio port for some reason
-
Bag of **** they are
Saying that I've never had any issues on a home hub but for some reason audio challenge has stopped working on a site I set up at Christmas
I've tried telnet to the audio port that's forwarded along with the others (udp summat or other) and its blocked. Wtf is that all about as it worked whilst commissioning ???
-
same here
I Presume these are fine for outside?
-
So got a job lined up that needs a wireless bridge to an outbuilding across a road for a IP camera to stream back to the house. Building is no more than 50m line of site. Never used a bridge before but was thinking of using these?
http://www.4gon.co.uk/ubiquiti-simple-pointtopoint-wireless-bridge-kit-p-5440.html
Would this be suitable? What's the set up like? I can get by with IP.... But in no way an expert lol!
-
whats the contact make/model
some have a NO/NC jumper.
-
so i might have to port forward to one of these. I had a mare with the last one and as such reluctant to have a mare with one again
How big of a job is it to sat swap to a netgear? What do i need to get from the isp? Or will these details be shown in the crappy tecnicolour??
-
deep base imo
Honeywell Replacement
in Members Lounge (Public)
Posted · Edited by 9651
I agree
We've gone to texe elite for now, seem ok
I fitted about 20 of the new ones, had enough after a day with them so sent the rest back.