-
Posts
2,658 -
Joined
-
Last visited
-
Days Won
10
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by sjsturner
-
-
£20 for Manuka mate, you must be bashing a lot of houses...
-
I remember Lemsip as a kid, nothing more disgusting and then they brought out the blackcurrent one which was even worse!
i just take the standard para and ibruprofren for this stuff, cup of tea. And savage hot curry works for me.
-
Speak to Frank
May just be burning off last nights drinks still
- 1
-
Cheeky git.
id never do guarding. There’s one alarm firm round my way that “does it all”
the engineers have to do there SIA bits for it and do occasional night patrol.
-
5 minutes ago, WDT said:
This is true,
Theres more chance getting jobs in domestic then a commercial when not approved was more my point I would think the owner of a big shop or warehouse is not likly to want an app? but S.W.A.T and k9 unit to be called. Is what i was getting at.
That’s true.
i do get a lot of commercial that don’t want URN though just an ARC connection.
some don’t think it’s necessary.
some don’t trust the police to turn up.
some like to use guarding firms.
the apps and Smart Digis is a good opportunity for the small companies though like you said.
-
Install of apps ect is fuelled by demand.
nearly every domestic quote we do, we get asked if they can have an app.
we also do “proper comms” and outline the pros/cons and pricing of each form of comms.
but ultimately it’s whatever they want that goes in.
-
28 minutes ago, Steve Jones said:
We’ll call it a day, didn’t come on here to be mocked.......
wanted some help to some serious quaestions......I will find out another way..
as I said the wiring is 30 years old, so a wireless system seems the way to go.......
maybe this can can be closed now, don’t think I will find out what I need.....
Your not being mocked Steve, the good wireless is very expensive and would cost more than the £400 you didn’t want to spend anyway, they are just as hard to set up and program.
i would always use the wiring if given the option, providing it’s all okay of course
- 1
-
Out of interest 6, do any isp’s update their routers routinely BT for example, I have heard of issues with certain routers with this believed to be a possible culprit of connection problems
-
Lol, I like what you did there
-
-
3 hours ago, PeterJames said:
He had only made one post when he applied so I deleted his application, he's made 6 now but hasnt applied since so no I havent
That’s right PJ rules are rules and Dave just got his “privilege checked”
-
7 minutes ago, sixwheeledbeast said:
Did they cover all the things I mentioned in my post? I said initially its not as simple as sticking wires in terminals.
Does the Blaster have Back EMF protection? Possible but if you don't check you could blow the panel or output.
I wouldn't use a bell terminal for this unless there was no other option due to my points above, however:-
Did they ask what was in the bell terminals already and calculate the current? Again could blow the panel or bell trig if not checked.
Did you adjust the bell time so not to burn the master out? Blasters have a duty cycle and will burn out if overrun.
Was it explained about noise pollution regulations and if the sound is deemed excessive the LA can force entry to the property to kill it?
QFA
you're right on every point, bit slack if techs answer is banging on bell trig, with no mention of other issues.
the number of blown contacts/outputs I’ve come across in the past have been feeding mag/strike locks to a simple handy relay in a panel.
-
7 hours ago, Oli_me said:
Hi all, I spoke to Texecom support earlier today, they were really helpful told me to wire the negative into the Bell terminal, and the positive into 12V +
they said the relay in the master blaster doesn't draw much and will be fine. Happy days and yup tested it...... ouch it's loud
I would fit back emf protection by way of a varistor or diode at the MB terminals if it were me, if not then there’s a strong chance of blowing your panel aux supply.
-
Not sure, I’ve done it using downloader.
you sure the output is set up correctly with yourT/switch?
used to love programming these, first time ever was a massive ball ache though
-
2 hours ago, f1eldsy said:
No door contact on the system. Is the contact been opened first likely to ‘wake’ the PIR’s?
No.
may I ask why no door contact?
-
Lol, no worries mate
-
I’ve never tried it mate to be honest, I doubt they would make it to the annnual service.
the E/E a door cont?
if so they are “always awake” anyway or should be.
you may need to delete and then enroll and mesh if that’s the case. Does it walk test out ok?
-
You mean “always awake”?
depletes battery life is the only problem.
are you giving the PIR,s time after you set the system?
-
Yeah that sounds good.
-
It’s certainly a port forward issue, do you access to a diffrent router you could try?
its not a HH3 is it?
-
-
Sorry, to clarify you are getting pop ups for Set/Unset engineer Access.
but if you create an intruder Alarm event you get nothing?
after doing this and you unset/reset the system do you then get the unset message?
-
My beef was with the IT guy not the router, but I did follow the defaulting instructions and had all the right lights flashing, it came up as the default router code, then changed to what it was originally programmed as, along with the password nobody knows!
-
As above ^^
its in “UDL options”, “program Digi” under “Reports”
you select and de-select the reporting types from there
Sub contractor available southampton
in Security Job Requests and Vacancies
Posted
Nah just saw that £20 in Tesco.