Service Engineer Posted March 13, 2005 Share Posted March 13, 2005 Where did Gardtec come from..? Is there any writing on the panel or its pcb. ........................................................ Dave Partridge (Romec Service Engineer) Link to comment Share on other sites More sharing options...
Guest Posted March 13, 2005 Share Posted March 13, 2005 Where did Gardtec come from..? 43919[/snapback] Just looked like a Gardtec, hence the ? after it. Could be wrong though, it was a bit of a guess. Panel's a XPC though is it not, or shall I just go away now? Link to comment Share on other sites More sharing options...
j.paul Posted March 13, 2005 Share Posted March 13, 2005 its an accord xpc bellbox Its a flashguard sounder (Xtravert) http://www.klaxonsignals.com/security_sounders_value.htm There are no stupid questions, but there are a LOT of inquisitive idiots. Link to comment Share on other sites More sharing options...
Mavrick_001 Posted March 13, 2005 Share Posted March 13, 2005 Where did Gardtec come from..? Hi to all, Dave is right that's no Gardtec bellbox, & panel isn't Gardtec either!!! Umm someone got the beer goggles on obviously, or is it back to the electrical vs alarms again!!!! As for the poor guy having a go himself, follow the wiring that the others have given you. Failing that faulty bell probably!! all CCTV Intruder Access Control Tony Hughes, Proprietor, TRADE MEMBER Link to comment Share on other sites More sharing options...
Guest neo Posted March 13, 2005 Share Posted March 13, 2005 on the main alarm panel there is PCBC FR4A thats all i can see apart from a load of numbers Link to comment Share on other sites More sharing options...
Service Engineer Posted March 13, 2005 Share Posted March 13, 2005 So then to sum up: the top trigger is trigger + LEAVE UNUSED the next one down is trigger - GOES TO YOUR "?" supply + GOES TO BELL +12V supply - GOES TO 0V strobe + LEAVE UNUSED strobe - GOES TO PANEL STROBE tamper + LEAVE UNUSED tamper - GOES TO YOUR "T" ........................................................ Dave Partridge (Romec Service Engineer) Link to comment Share on other sites More sharing options...
Guest neo Posted March 14, 2005 Share Posted March 14, 2005 hi guys ive tried this out and it just keeps going off wont stop my keypad wont stop it either, any other suggestions the top trigger is trigger + LEAVE UNUSED the next one down is trigger - GOES TO YOUR "?" supply + GOES TO BELL +12V supply - GOES TO 0V strobe + LEAVE UNUSED strobe - GOES TO PANEL STROBE tamper R LEAVE UNUSED tamper S GOES TO YOUR "T" are the last 2 correct Link to comment Share on other sites More sharing options...
Chris Teague Posted March 14, 2005 Share Posted March 14, 2005 I would have tried Tamper R to "T" and not "S"? Chris Teague (Sales & Operations Manager) Sightguard Intruder Division Covering the Isle of Wight: - Design, Installation, Maintenance & Takeover of Intruder Alarms, Fire Alarms & Equipment, CCTV, Access Control, Nursecall. Keyholding Service, Guarding & Cash in Transit. SSAIB & NICEIC Registered Tel 01983 884000 / 884440 Any comments / opinions posted could be the voices in my head speaking, but they are my opinion only and do not represent those of my employer or Company Link to comment Share on other sites More sharing options...
Service Engineer Posted March 14, 2005 Share Posted March 14, 2005 Hmm, he did say Tamper + & - on previous post.. But yeah agreed now. tamper R LEAVE UNUSEDtamper S GOES TO YOUR "T" But perhaps Tamper S = Tamper supply, in which case it needs a link from 0v And yeah Tamper R to your "T". ........................................................ Dave Partridge (Romec Service Engineer) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.