I have an Elite 48 running legacy V3.02 firmware that I am upgrading for SmartCom support. My local Wintex structure does not contain the old flashing tools. Can anyone pPlease provide a direct download link or file transfer for the legacy standalone Premier Elite Flasher application along with the V5 intermediate firmware binary? I can request it tomorrow from Texecom but today is my day off and I was hoping to get it done if possible!

Do you have the flash tool PCB + the usb lead ?

Intermediate binary?

Smartcom was from V4.x, done correctly you should be able to go straight to V6.

Flasher includes the binaries now, they're not usually shipped separate although possible.

I have the flasher interface and the usb-com cable and did have the flasher software but I can't find it and it's not available from the Texecom website when I sign in with my installer account

I now see it's part of the download I got from texe.com yesterday thanks, I was worried it would corrupt the panel running V3 to V6 but it appears it will not 

Premier-Elite-V6_06_02-Firmware.exe

LS1 is the UK firmware

The other month I asked for a little molex lead for a psu2000, they fcuk' me about so I just made my own.

I've only used there stuff for 30 years. I now hate them more than the HSBC, who briefly debanked me If I had an loan or an overdraft they'd probably finished us off. Again used for 30 years or thereabouts.

Panel needs a full factory default for any major firmware upgrade, I personally recommend all.

Copy programming, flash, default, let Wintex convert from V3 to V6 by changing the panel version, put the programming back.