Hi all,

 

Had our Alarm upgraded a while ago, and kept original sounder for various reasons. 
 

The panel is an Eaton G2SM panel and the bell / sounder is a Risco Novagard 2. Recently opened the panel to check the exact model, and noticed the green wire from the sounder isn’t connected at the panel end. 

 

Everything seems to work ok, the sirens sound and the lights flash when the Alarm is set off and the red LED’s run when not armed. 
 

Anyone have any thoughts on how this wire should be connected and whether the rest of the sounder wiring looks ok? 
 

Any advice welcome. 
 

thanks Nate. 

11 minutes ago, nmpuk said:

Hi all,

 

Had our Alarm upgraded a while ago, and kept original sounder for various reasons. 
 

The panel is an Eaton G2SM panel and the bell / sounder is a Risco Novagard 2. Recently opened the panel to check the exact model, and noticed the green wire from the sounder isn’t connected at the panel end. 

 

Everything seems to work ok, the sirens sound and the lights flash when the Alarm is set off and the red LED’s run when not armed. 
 

Anyone have any thoughts on how this wire should be connected and whether the rest of the sounder wiring looks ok? 
 

Any advice welcome. 
 

thanks Nate. 

Spare?

Not sure. Tbh.

 

Managed to get to the sounder and took this pic of the internals. 
 

Green is terminated at TMPR at the sounder. 

54 minutes ago, nmpuk said:

Not sure. Tbh.

 

Managed to get to the sounder and took this pic of the internals. 
 

Green is terminated at TMPR at the sounder. 

Weird that I thought 

 

0v goes to tmf as a link

 

Then

 

Tmpr goes to the panel tamper return 

 

If that at all makes sense 

 

Edited July 25, 2025Jul 25 by MrHappy

that ↑

 

+ the tamper in linked out in the panel.

4 minutes ago, MrHappy said:

that ↑

 

+ the tamper in linked out in the panel.

How you split this point to trade ? 

4 minutes ago, al-yeti said:

How you split this point to trade ? 

 

edited, (good enough ??)

Sorry is it not wired correctly? Whats the correct wiring?

 

is tmpf not correct? 

36 minutes ago, MrHappy said:

 

edited, (good enough ??)

No for another discussion lol don't be scared 

5 minutes ago, nmpuk said:

Sorry is it not wired correctly? Whats the correct wiring?

 

is tmpf not correct? 

All seemed correct except the link in the panel removed that 

 

The link goes in the bell for 0v to tmf 

 

Then tmpr white or green doesn't matter goes to the panel bell tmpr , as in leave white where it is and remove the black link in panel 

 

If that makes sense 

Ok, so remove the wire running from 0v to TR, but leave the white cable in TR? 
 

And Green to be left as it is? 
 

thank you!