cables are all under floor and not under carpets

 

22 minutes ago, Amit said:

cables are all under floor and not under carpets

 

are you an alarm man or diy'er ?

yes Alarm, cctv and door entry systems retired now just helping a friend

1 hour ago, Amit said:

yes Alarm, cctv and door entry systems retired now just helping a friend

 

cool, usual thing of cable, device or controls

 

if the cable is laid under the boards in a manner its trapped or damaged by a pipe, walking around on the floor above it may send the alarm batshit,

 

something drawing lots of current, eg too much stuff on small controls may send the alarm batshit

 

something odd is happening , check all the fuses are the correct rating eg-

 

some mong may have a 5amp fuse where a 1amp belongs & when it draws too much current it batshits the alarm & does not blown the fuse

 

with the tamper tied down gently press parts of the endstation pcb to see if it goes batshit

 

check both continuity of all the all cables & then take them apart & check there is no shorts on every pair ?

 

or change you mobile no. & find a new friend with a working alarm ?

3 hours ago, Amit said:

retired now and got a new  friend, thanks Mr happy 

Coolio