Skip to content
View in the app

A better way to browse. Learn more.
Security Installer Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

C-TEC 2 Zone Panel with intermittent "General Fault" Alarm

Brian Cork
in General Fire Alarm Queries

Featured Replies

Hi All,

 

Any suggestions appreciated!

 

I have a problem with a C-Tec, 2 Zone panel which keeps triggering the "General Fault" and "Power Supply Fault" beep.

 

There is only one Zone with 5 detectors.

 

The mains trip switch has been replaced, and the mains supply feeds a second panel, which does not have any problem.

 

The panel and backup batteries have been replaced.

 

There are no Zone Fault Alarm, and the detector are triggering when tested.

 

Any ideas what might be causing the problem ?

 

 

You could try replacing the PSU but in my experience this rarely fixes it its normally the panel buggered down to the batteries not being replaced frequently enough

Had the occasional one where a power cycle makes it go away.

Have you checked everything over with a meter?

You replaced the whole panel then?

 

Create an account or sign in to comment
Go to topic listing

Recently Browsing 0

  • No registered users viewing this page.

Important Information

By using this site, you agree to our Terms of Use.

I accept

Account

Navigation

Search

Search

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.