Custie86 Posted August 25, 2020 Share Posted August 25, 2020 Hi Guys/Gals. I installed a Honeywell Optima security alarm system the other day. The system tested okay, I have programmed the zones, Competed walk test, Tested siren, Tested strobe. The system sets but when entering the house and triggering the PIR, The panel sounds and then siren sounds but only for a couple of seconds to repeat about 15 seconds later. Tried everything in the manual to rectify but nothing seems to work. I will try Honeywell Customer services tomorrow but really stressed as to what it could be. Any help would be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
james.wilson Posted August 25, 2020 Share Posted August 25, 2020 Is this the internal sounder? have you connected a sounder to the speaker output? Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
PeterJames Posted August 26, 2020 Share Posted August 26, 2020 Or taken the engineer link off the bell? Quote Link to comment Share on other sites More sharing options...
aissecur Posted September 2, 2020 Share Posted September 2, 2020 have you programmed as a fire zone? Quote Link to comment Share on other sites More sharing options...
PeterJames Posted September 2, 2020 Share Posted September 2, 2020 2 hours ago, aissecur said: have you programmed as a fire zone? It would not need to be set to trigger the alarm if he had Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.