Skip to content
View in the app

A better way to browse. Learn more.
Security Installer Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Lightsys 2 with new router and no connection

renem
in Members Lounge (Public)

Featured Replies

Hi all,

 

We replaced our current router with another one, kept the same IP address and now Risco Cloud can't connect anymore. I noticed there were two (old) similar threads here:

 

 

 

All other network devices have no issues. I can ping the lightsys 2 on the network. It seems the lightsys 2 doesn't refresh its ARP cache or something, sticking to the MAC address of the old router. It's been a couple of hours now. I tried resetting the router and disconnecting the LAN cable for a short while but it doesn't make any difference.

 

Anyone else ran into this before?

 

Rene

Call your installer 

1 hour ago, renem said:

Hi all,

 

We replaced our current router with another one, kept the same IP address and now Risco Cloud can't connect anymore. I noticed there were two (old) similar threads here:

 

 

 

All other network devices have no issues. I can ping the lightsys 2 on the network. It seems the lightsys 2 doesn't refresh its ARP cache or something, sticking to the MAC address of the old router. It's been a couple of hours now. I tried resetting the router and disconnecting the LAN cable for a short while but it doesn't make any difference.

 

Anyone else ran into this before?

 

Rene

You will have to call installer for this bit , get furlough wallet out 

  • Author

I'll call the installer. From a network perspective, I'm still curious whether this is a known issue?

 

Anyone knows what happens behind the scenes?

45 minutes ago, renem said:

I'll call the installer. From a network perspective, I'm still curious whether this is a known issue?

 

Anyone knows what happens behind the scenes?

I think it's hardware issue , diff panel but I have a quantam 70 that plays up on the lan in a similar way if you mess with network , otherwise it's happy 

  • Author

I'll call the installer and post the results here if they figure out what causes this. Might be useful for others.

2 hours ago, renem said:

I'll call the installer and post the results here if they figure out what causes this. Might be useful for others.

Probably best they will be able to change setting at the server end which may be all thats required, 

  • Author

In case anyone else runs into this. Disconnecting the network cable for a short while and reconnecting didn't work.

 

Disconnecting the network cable for 30 minutes, then reconnecting did the job. Even with a different default gateway.

  • 6 months later...

Hi, where do I need to go to on my panel to reconnect? 
thanks 

5 hours ago, Wmily said:

Hi, where do I need to go to on my panel to reconnect? 
thanks 

You cant your installer has to do it, the only other way is to use the same ssd and password as your old router

Create an account or sign in to comment
Go to topic listing

Account

Navigation

Search

Search

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.