Hi all,

 

just a quick question for you and someone may have an answer.

 

when setting my customers 9651 in Mode B for when they go to Bed I have the exit mode set as silent set.  Now there is no problem setting it or anything it is just that when I walk past the hall detector to go upstairs, the keypad beeps and displays zone fault.  Is there anyway other than taking that detector off the system in B that can stop this beeping?  I need the detector as it is my entry route in the morning for the timer on the keypad to unset alarm.

 

Any help appreciated.

 

thanks 

What is the sensor set as? Meaning attributes?

There is no other attributes just set as FE abcd as there is no door contact.

1 hour ago, NJK91 said:

There is no other attributes just set as FE abcd as there is no door contact.

This panel is mashed on this , especially earlier version, went over this with doctor fusion , he's missing in action now 

 

On part set they set the alarm off when you enter that zone rather than starting the timer 

 

Ideally best situation is to install a second keypad upstairs and unset from there 

 

 

Although on silent set if it's in timer exit because mode B has an exit time 

From what I remember the best you can do is turn down the LS volume.

Front door contact is normally a good idea due to this type of thing.

3 hours ago, sixwheeledbeast said:

From what I remember the best you can do is turn down the LS volume.

Front door contact is normally a good idea due to this type of thing.

Eh?????