Hello Everyone,

 

I bought ENF32GB-WE one year ago.

I would know if this version will allow me to arm/disarm my system remotely by sending sms ?

 

Thanks.

 

Edited March 31, 20179 yr by datadiffusion
This topic has been split - please always start a new topic rather than adding onto a 2 year old one. Thanks!

Have you looked at user manual?

My main concern is that I cannot find one same answer.

I explain what I mean, If i check on pyronix website, I can see that DIGI-GSM module support remotely control BUT as we can see through this topic in real life it is not true.
I sent a mail to a reseller and he certified to me that remote control is only support by Homecontrol+ APP.

So, I am lost ! And I have not told of my another problem : I will use DIGI-GSM with French network telecommunication.

Edited March 30, 20179 yr by acme

Manual says gsm v9.2 and above will allow SMS commands to be sent 

 

Although scrolling back they say UK version doesn't allow it lol

Ok it won't do it , according to install manual

 

Get a quantam70 fitted instead with a gsmq but you will need a contract SIM if you enable all the functions and all the SMS options 

Ok, so, if I well understand, my panel is not compatible with remote control even if software version is more than to 9.2, right ?

 

Quantum70 is another panel right ?

Hkc quantam70 , but installer needs to do it all for you , but once it's in the gsm is good on remote if that's what you want

Ok but I want to keep my Pyronix...I love it

 

I sent an Email to Pyronix support and they said that my enforcer must be compatible with remote command.

2 hours ago, al-yeti said:

Hkc quantam70 , but installer needs to do it all for you , but once it's in the gsm is good on remote if that's what you want

just an fyi, the hkc can do sms via wifi or lan too