greetings, i have to quote to replace a menvier control panel which was once on redcare but bells only now. the keypad appears to be exactly the same as a mevier m800 series panel, there is what looks like one of menviers node expanders next to the panel and the zone list is numbered as zones 0001 to 0006 which i assume is wired off the panel and zones 2011 to 2018 which i assume are zones wired from the expander next to the panel. i have not opened the panel. can i also assume that this is not an id biscuit panel? it would be handy to assertain this before i quote to fit with a standard double pole eol panel. i have attached a library picture of keypad and node. thanks.

Never assume 

 

it certainly could be iD

well this is why im here asking these questions and showing photos of the equipment!

40 minutes ago, jjohn said:

and showing photos of the equipment!

 

I'd assume the plastic box was same for all the supported nodes ?

 

What controls do you intend to put in its place ?

hi

the problem is menvier  used the node box for ever thing for many years  from a six zone expander to radio node  to x node or m node and if the panel  box is full size  they used that for years to