Russelllss Posted September 24, 2015 Share Posted September 24, 2015 Hi, I was recently called to a customers house for a phone line faullt, I thought perhaps they had changed their telephone provider and was a simple fix. however, when i arrived i noticed the keypad looked unfamiliar. I checked the control panel which was a Honeywell Ademco XPC which i thought strange as i have worked on those systems before but never with that keypad. I later discovered that the keypad is for the Honeywell Vista? So basically i reset the engineer code and tried to clear the line fault but have had no success. I cant seem to find a manual that ties these two together. Following the XPC manual doesnt seem to work. As far as i understand to clear the line fault on the XPC you type 7 for group 7 then 7 again for option 7 and 0 to disable the line fault but obviously that isnt the case with this bugger! Has anybody had experience with these systems and if so could explain where i am going wrong. Any help would be much appreciated. Thanks. Russell Quote Link to comment Share on other sites More sharing options...
james.wilson Posted September 24, 2015 Share Posted September 24, 2015 is that the actual keypad or a google. Honeywell had a system before the 2-20 after the 16+ Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
al-yeti Posted September 24, 2015 Share Posted September 24, 2015 Yes there's a few of these about Vista keypad ademco panel Quote Link to comment Share on other sites More sharing options...
andy82 Posted September 24, 2015 Share Posted September 24, 2015 I believe what you are looking at is the accord with the rf keypad, it looks similar to the keypad above but the programming is the same apart from the rf detectors Quote Link to comment Share on other sites More sharing options...
Russelllss Posted September 25, 2015 Author Share Posted September 25, 2015 The picture is just one i found on google. is anyone aware of how to disable the line fault? following the accord programming doesnt work. Quote Link to comment Share on other sites More sharing options...
james.wilson Posted September 25, 2015 Share Posted September 25, 2015 Is it a galant? Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
al-yeti Posted September 25, 2015 Share Posted September 25, 2015 Is it a galant? Yes that's the one a galant Quote Link to comment Share on other sites More sharing options...
Russelllss Posted September 27, 2015 Author Share Posted September 27, 2015 Looks like thats the one. struggling to find an installation manual. Is anyone familiar with how to disable the line fail? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.