dwdave Posted July 13, 2015 Share Posted July 13, 2015 Once complete I intent to use my alarm day and night. Complete set for when away from home and part set for perimeter / ground floor at night. I will also have one zone that I want to be set all the time. It will cover a safe. But it will need to be disarmed for authorised entry. A 24hr zone function on the galaxy can't be disarmed. Probably on a contact / shock. Is this where groups come in? Quote 'till the next question ... Link to comment Share on other sites More sharing options...
james.wilson Posted July 13, 2015 Share Posted July 13, 2015 You could use groups for that, or you could use a link to disable. Either way is doable, I'd probably go down the link route for 1 circuit Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
dwdave Posted July 13, 2015 Author Share Posted July 13, 2015 You could use groups for that, or you could use a link to disable. Either way is doable, I'd probably go down the link route for 1 circuit Ive seen the "Links" menu but I have always skipped by it. Â I will get the programming manual out in a while and read up on links (what they are, what they do) Â Thanks. Quote 'till the next question ... Link to comment Share on other sites More sharing options...
james.wilson Posted July 13, 2015 Share Posted July 13, 2015 its like a virtual link. You have a source then a destination. Quite powerful when needed. In your case id say a link source would be a latching code, destination be the vibe on your safe Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
dwdave Posted July 16, 2015 Author Share Posted July 16, 2015 I've just read up on links and is starting to make sense. Could I set the vibe on the safe to have a custom output for a local siren. ie, if for intruder I have 2 ext sirens, 1 internal siren and a master blaster as my outputs, could I have the vibe on the safe only output to say the one internal siren? Quote 'till the next question ... Link to comment Share on other sites More sharing options...
james.wilson Posted July 16, 2015 Share Posted July 16, 2015 Only if you link the circuit to the output. If the sounders are on bell outputs then bells will fire in alarm Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
dwdave Posted July 17, 2015 Author Share Posted July 17, 2015 Would you normally put all sounders on the bells output? Could I use a safe limpet = are they any good? Quote 'till the next question ... Link to comment Share on other sites More sharing options...
al-yeti Posted July 17, 2015 Share Posted July 17, 2015 Depends what you want the sounder to do , ie programme the output Quote Link to comment Share on other sites More sharing options...
james.wilson Posted July 18, 2015 Share Posted July 18, 2015 safe limpet is yes, but id suggest if you need one then you shouldnt be doing it urself. Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
dwdave Posted July 18, 2015 Author Share Posted July 18, 2015 I don't need one to satisfy anyone but myself. It's not a requirement , more a personal request. Quote 'till the next question ... Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.