lamplight73 Posted October 2, 2014 Share Posted October 2, 2014 Hi Joined a company that mostly use Menvier TS and MSeries. Have never seen so many random tamper faults for no reason. Pirs, Dualtecs , contacts, vipers, wired double pole or EOL. Use same devices on Scan/ Texecom products, same installers etc no issues. I have had 4 random tamper faults this week, different sites, range of devices etc, but Menvier panel. Anything I need to know? Mark Quote Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted October 2, 2014 Share Posted October 2, 2014 Nope, never had issues with Menvier like that. I thought that was more of a Galaxy thing. Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted October 2, 2014 Share Posted October 2, 2014 How many of the M series tampers were on expanders or PSU expanders? Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
lamplight73 Posted October 14, 2014 Author Share Posted October 14, 2014 Hi All on expanders Quote Link to comment Share on other sites More sharing options...
9651 Posted October 15, 2014 Share Posted October 15, 2014 (edited) Push on connectors Look no further. Edited October 15, 2014 by 9651 Quote Link to comment Share on other sites More sharing options...
lamplight73 Posted October 15, 2014 Author Share Posted October 15, 2014 Push on connectors, on the data line in and out only i think? wouldn't that just cause a lost node? network errors in log? Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted October 18, 2014 Share Posted October 18, 2014 Push on connectors Look no further. If fitted - they stopped using them but not sure what year, you can still see the space on the PCB where it would have been push-ons... Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
lamplight73 Posted November 10, 2014 Author Share Posted November 10, 2014 loads more over the last few weeks, no rhyme nor reason. If it is push on connectors surely Menvier would admit this on a technical call? Quote Link to comment Share on other sites More sharing options...
lamplight73 Posted November 10, 2014 Author Share Posted November 10, 2014 Say £75 a local call out, 3/ 4 times a week? That we have to account for. Thats a lot of cash. Only happens on Menvier panels? Quote Link to comment Share on other sites More sharing options...
9651 Posted November 10, 2014 Share Posted November 10, 2014 We've got one panel that I'm not proud to admit had said issues. Zones going into mask and all sorts. Soldered the connections on, disappeared over night. Not a sqeek since. It's why we stopped fitting menvier. We were TS all the way until m series. Binned them off for Galaxy over 6 or so years ago one. Never looked back. I suggest you guys look at the premiers, as they are similar in feel, good replacements for existing menvier estates, seem to have sorted some of the software glitches they had. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.