Jump to content
Security Installer Community

Ceiling Poles & 360 Deg Sensors


drewabs

Recommended Posts

I think would be OK very short drops but too long might sway too much?  The metal poles are solid when up..

the sway would worry me depending on the environment but anything with a 3m drop and one fix is gonna sway whatever

Link to comment
Share on other sites

the sway would worry me depending on the environment but anything with a 3m drop and one fix is gonna sway whatever

 

 

currys & pc worlds mate, 360's & mic's all on at least 3m drops - never known the sway to be an issue

Link to comment
Share on other sites

currys & pc worlds mate, 360's & mic's all on at least 3m drops - never known the sway to be an issue

stable environment tho id be more wary of doing it in say in a warehouse with a lot of roller doors that are open all day etc

Link to comment
Share on other sites

stable environment tho id be more wary of doing it in say in a warehouse with a lot of roller doors that are open all day etc

 

yeah, you're right.

Link to comment
Share on other sites

the sway would worry me depending on the environment but anything with a 3m drop and one fix is gonna sway whatever

Not like conduit.

If it sways it ain't noticeable on cameras.

Link to comment
Share on other sites

cheers guys really helpful replies.

 

attended site today and saw the cctv company using 20mm gal conduit with circular end on. so iam going to match up with what they have used. must just say though because they have fixed straight to the girder which is on a angle and not flat, there poles hanging down look **** with the camera on the ends. I am sure the client will choose our cctv system next time when I point out how **** the swaying poles look.

 

but thanks guys job now sorted !!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.