Register Wireless Key Fobs To Honeywell Galaxy 2

[Gethers]

Can anyone tell me how to register new wireless key fobs (TCC8M) to a Honeywell Galaxy 2 system please? Thanks in anticipation.

[GalaxyGuy]

Enter master code.
42.1 (Program users)
Select a user account and 'ent'
Select option 5 (RF Fob)
Press '*'
Then press any key on the fob to populate the serial number.

[Gethers]

Many thanks for your prompt response GalaxyGuy - very helpful.

[nimeshc1986]

Enter master code.

42.1 (Program users)

Select a user account and 'ent'

Select option 5 (RF Fob)

Press '*'

Then press any key on the fob to populate the serial number.

 Hi mate, how can I add a Honeywell wireless panic alarm for the Galaxy G2-44? (TCBPA8M-1) 

 

I already have two RF Portals (37 zones currently) Obviously the PA needs to work at anytime. It worked previously when I had the G2-20 panel but recently upgraded to the G2-44 and forgot how I did it. 

 

Thanks in advance

Edited February 16, 2016 by nimeshc1986

[al-yeti]

Option enable pa I think in rf options

[nimeshc1986]

Option enable pa I think in rf options

Thanks for your reply mate. When I went home I did the following but it didn't work.

 

Enter master code.

42.1 (Program users)

Select a user account and 'ent'

Select option 5 (RF Fob)

Press '*'

Then press any key on the fob to populate the serial number

 

The above all worked fine but when I pressed the panic alarm button, the lights would flash but nothing else. With regards to selecting a user account to assign the fob to. I created a new user and assigned the fob to that. Is that right? or should I have selected an existing user and assigned it under them. I have also replaced the batteries so I know its not that.

 

Also looking at option 50 (engineer), there is a hot key option. Does this need to be enabled?

 

Thanks in advance

[GalaxyGuy]

You need to set these options too:

 

Menu 51.13.1 -  On + Key Fob Panic

Menu 51.13.2 -  Audible Panic

[nimeshc1986]

Thank you guys

I will give it a go when I get home from work. I will let you know how I got on.

 

Thanks

[al-yeti]

Thanks for your reply mate. When I went home I did the following but it didn't work.

Enter master code.

42.1 (Program users)

Select a user account and 'ent'

Select option 5 (RF Fob)

Press '*'

Then press any key on the fob to populate the serial number

The above all worked fine but when I pressed the panic alarm button, the lights would flash but nothing else. With regards to selecting a user account to assign the fob to. I created a new user and assigned the fob to that. Is that right? or should I have selected an existing user and assigned it under them. I have also replaced the batteries so I know its not that.

Also looking at option 50 (engineer), there is a hot key option. Does this need to be enabled?

Thanks in advance

Ok but it's not what I said , as galaxyguy gave more detail that will fix it, as the options has to enable the function to work in the settings

[nimeshc1986]

Ok but it's not what I said , as galaxyguy gave more detail that will fix it, as the options has to enable the function to work in the settings

Thank you to everyone who helped me. The panic alarms are all working fine.

 

Regards