Jump to content
Security Installer Community

Optima XL6 manual needed


Guest pap_1

Recommended Posts

Guest anguscanplay
Hi Fastcar or any other expert here, please help. had a fine working optima xl6 alarm system, had lights changed by an electrician 2 days ago and since then the alarm isnt working, there is only the red light of power which is lit, no sound on pressing any buttons, the sensors are working and there is also lights under the buttons of the alarm, tried all tricks of mains etc.. please help, cheers, pep.

simple get the sparks back - it worked before now it doesnt - might be no mains , might be duff battery

Link to comment
Share on other sites

  • 4 weeks later...
Please send me one as well. Yesterday power cut, it was noising for hours. Thanks.

a manual won't fix that i'm afraid, do a search on here. if that is no help post your location and some one will offer you the help you need.

Link to comment
Share on other sites

  • 4 weeks later...

Hi all.

I've an Optima XL6 alarm. It seems we must have some problem with our electrical system as the fuse that the alarm is wired keeps blowing out. As a result the alarm has been going off for just over two hours now and is still going strong (starting at 5am in the morning!).

Is there anything I can do to stop it? Any help/ suggestions would be greatly appreciated.

Nick.

Link to comment
Share on other sites

Hi all.

I've an Optima XL6 alarm. It seems we must have some problem with our electrical system as the fuse that the alarm is wired keeps blowing out. As a result the alarm has been going off for just over two hours now and is still going strong (starting at 5am in the morning!).

Is there anything I can do to stop it? Any help/ suggestions would be greatly appreciated.

Nick.

Unfortunately you have 3 basic choices:

1. Wait until the batteries run out and leave it disconnected

2. Sledgehammer!

3. Call out an alarm engineer

As you probably realise, methods on how to disable an alarm can be of great use to burglars so can't be posted here in public.

PS Oddly enough an alarm over the road from me has been going off now for about 10 minutes - everyone is ignoring it.

Edited by amateurandy
Link to comment
Share on other sites

Guest anguscanplay
Unfortunately you have 3 basic choices:

1. Wait until the batteries run out and leave it disconnected

2. Sledgehammer!

3. Call out an alarm engineer

As you probably realise, methods on how to disable an alarm can be of great use to burglars so can't be posted here in public.

PS Oddly enough an alarm over the road from me has been going off now for about 10 minutes - everyone is ignoring it.

well not quite - youve had a look obviously ( its an old chestnut )

Link to comment
Share on other sites

well not quite - youve had a look obviously ( its an old chestnut )

Nope. It's one that's always going off randomly so I recognise it's sound.

It's also at a house where there's a very loud car alarm that goes off for about 15 seconds every time they use the car - dunno why, presumably a dumb design or incorrectly fitted. It wails then makes 3 or 4 loud beeps as they disarm it. As they regularly go out early and wake people up with it they get no sympathy. :ranting:

Link to comment
Share on other sites

  • 3 weeks later...

Hi, Ive lived with my Optima xl6 alarm for the past 7 years since we moved in, we have no idea how to isolate zones-we'd be really grateful if someone would E-mail us the user manual. I have seen the single page of instructions about how to change the code/memory and test but wonder if there is any more information out there. Many Thanks

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.