Jump to content
Security Installer Community

Help Once Again, (Pyronix Sterling 10)


g4m8l3r

Recommended Posts

Well dig out the manual and then fit the new devices as the others and then follow the programming. Then test to ensure all work.

Then do a regular walk test to ensure they still work.

It may last, it may not. If it does you have had a result.

 

Unfortunately we do not give out manuals.

Link to comment
Share on other sites

Well dig out the manual and then fit the new devices as the others and then follow the programming. Then test to ensure all work.

Then do a regular walk test to ensure they still work.

It may last, it may not. If it does you have had a result.

 

Unfortunately we do not give out manuals.

thats fine I have the manual with me just was hoping for a bit of advice anything that may speed the process up before I start tomorrow

Link to comment
Share on other sites

Not a dig at you g4 but its amazing how little value people put on their security for their homes ect, like the guy who had a gun pointed at his wifes head but didnt want to spend more that a couple of hundred quid.

Just find it puzzling

Link to comment
Share on other sites

That was`nt directed at you in any way. Sorry if it came across like that.

It was just a comment to try and get the thread  away from the "bin it" attitude. Although even I have said it.

But as I mentioned the OP has said even a new keypad is out of the question for the veritas. Hell, if I had one I`d send it to him!

Link to comment
Share on other sites

Just an update guys, The code that I had been given was incorrect so not off to a great start, I shorted out the NVM pins on power up battery first and luckily the engineer who had fitted it didn't enable the security option for it :) , I have also noticed that the tamper has just been shorted and not connected on any of the sensors, also the tamper on the panel had been cut and just bypassed so I have fitted the new PIR's that I have and wired the tamper correctly, ran new cable to move the keypad and for a new sensor, tested it all first and then set off programming. so far all is well, I keep doing a walk test and works every time.  Im not saying the panel is good but I guess im just one of the lucky ones that has a working panel, well at least for now. 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.