shifty 1 Posted June 24, 2011 Author Share Posted June 24, 2011 Try high numbered presets, I know for instance that the KD6 dome uses preset 98 to toggle between col, col/mono and mono. hi. i will try again and see what happens but i have tried loads but obvious not all of them. thanks for your reply most appreciated to everyone thats helping me. thank you. Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted June 24, 2011 Share Posted June 24, 2011 To enter a dome menu on a Vi-K it's normally press DOME "Do" then press MENU. Try presets in a sequential order. Do presets 48 or 68 do anything? Could do with testing on a Maxcom to see if the domes working. Could be possible that a Vi-K keyboard will not give out the Dome Menu command at all. Have you got both domes working together now? Link to comment Share on other sites More sharing options...
shifty 1 Posted June 24, 2011 Author Share Posted June 24, 2011 To enter a dome menu on a Vi-K it's normally press DOME "Do" then press MENU. Try presets in a sequential order. Do presets 48 or 68 do anything? Could do with testing on a Maxcom to see if the domes working. Could be possible that a Vi-K keyboard will not give out the Dome Menu command at all. Have you got both domes working together now? hello mate, i have tried 48/68 but no joy you see when i press the menu key the red led does not flash on the dome.like i said all works just no menu and wont switch to bl/w.when i tried the dome on my universal keyboard i did get it to switch between col/and bl/w so i no it does work.what im going to do tommorow is connect it back up to that keyboard and see if i get the menu up.and yes both domes do work together and i can access the menu on the jvc by pressing the dome key+menu on the videoswitch keyboard ok thanks Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted June 24, 2011 Share Posted June 24, 2011 hello mate, i have tried 48/68 but no joy you see when i press the menu key the red led does not flash on the dome.like i said all works just no menu and wont switch to bl/w.when i tried the dome on my universal keyboard i did get it to switch between col/and bl/w so i no it does work.what im going to do tommorow is connect it back up to that keyboard and see if i get the menu up.and yes both domes do work together and i can access the menu on the jvc by pressing the dome key+menu on the videoswitch keyboard ok thanks If your problems just the Colour/Mono thing there's a command to toggle Colour/Mono and a seperate command to switch on Auto toggle Colour/Mono. It's just finding the correct sequence of buttons on the Vi-K for them commands. You may not need the dome menu. Link to comment Share on other sites More sharing options...
shifty 1 Posted June 24, 2011 Author Share Posted June 24, 2011 If your problems just the Colour/Mono thing there's a command to toggle Colour/Mono and a seperate command to switch on Auto toggle Colour/Mono. It's just finding the correct sequence of buttons on the Vi-K for them commands. You may not need the dome menu. yes thats right. thats all i need is to switch between the 2.thanks again mate. Link to comment Share on other sites More sharing options...
shifty 1 Posted June 25, 2011 Author Share Posted June 25, 2011 yes thats right. thats all i need is to switch between the 2.thanks again mate. hello everybody,can anyone tell me how to do a factory reset on my vcl dome. getting abit fed up of this dome now im running out of ideas i no i said i would not give up on it but ive just about had enough regards stan. :smash: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.