Hi, i am wondering if someone can help me. I have been given a used galaxy g2-12, i have installed in my house and connected all PIR's sounders etc. On powering up of the system it turns out that the default codes have been changed and they are unknown. I have never had the need to default galaxy codes before, i cannot find any information on how to default the codes, any help would be much appreciated.

Are we allowed to give out this type of information.

Input from a moderator may be required on the forum rules here.

John.

no

no

could the information be privately e-mailed to me? I dont see why it is a big secret, an intruder will not benefit from knowing this and most manufacturers publish this information in the engineer manual why is easily available online but for some reason honeywell have not published this information in there engineer manual.

no

no

thanks

Are we allowed to give out this type of information.

Input from a moderator may be required on the forum rules here.

John.

the rule book says

Do NOT post security control equipment defaulting information. Your post will be removed

Its not in the manual for a reason..... Stops the diyers and sprkies having a go on a professional system. Shame Texecom don't share this view on their professional panel really