Hi guys

Going to change me old Ventcroft box to a new shiny Texecom one but I'm not to sure about the wiring. Currently I have these connections;

–

+

hold off

RTM

TRG

Then this is how the new bell box connection are

+

0V

–VE Bell

–VE Tamper

–VE Strobe

How do I wire it up?

thanks

what are the connections in the panel?

the ventcroft had been working fine so its a simply a swap over but here are the connections at the Abacus panel

0V

AT

OP3

OP4

+HD

these are the connections which the bell wire is connected to.

0v to 0v

AT to -ve tmpr

op3 to -ve bell

op4 to -ve strobe

+hd to +

Should do the job.

+... +hd

0v... 0v

-ve bell... op 3 or 4

-ve tamper... AT

-ve strobe... OP 3 or 4

fiver says op3 is bell 4 is strobe james!

sorry was writing mine and missed your post.

your probably right though

Lets hope OP gets back.

Or you owe me

If he gets them the wrong way round the neighbours won't be too pleased...

Edited January 12, 201115 yr by Driller

Strobes cut off too now.