angellonewolf Posted February 1, 2009 Share Posted February 1, 2009 hi thanks for looking any help given work had a breakin did not get far as other security stoped them (the alarm did not put them off lol even when going) my own house had a pir fault after 10 years of installing never 1 false alarm.Got back home next day had a next door come round said your alarms going off and at a bit annoying only time it goes off they never had a look or try to contact me im now thinking what is the point on an out side bell box/strobe now to the questions i installed a accenta mini g3 intruder panel system 2/3 years ago at work all works fine (this is where i want to install the dialer) i hope with a bit of time (have not had look in the main box but from instructions will accept a speech dialer make honeywell ade but from what i have found on the net people have been having problems when the unit calls a phone you only get part or nothing of the automated message is this true ? i know this is only a Link to comment Share on other sites More sharing options...
james.wilson Posted February 1, 2009 Share Posted February 1, 2009 i have never had an issue with an informa. Yes the menvier SD1+ is a better dialler. IMO the menvier dialler are the best out there securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
Rulland Posted February 1, 2009 Share Posted February 1, 2009 I find the only drawback with the Menvier is it will only store 4 contact numbers-I prefer the Texecom-8 numbers and four inputs as opposed to the Menviers three. These days most people have a mobile so going on that in effect you can only store 2 contacts-home and mob numbers!. Link to comment Share on other sites More sharing options...
hpotter Posted February 1, 2009 Share Posted February 1, 2009 SD1 = 4 numbers SD2 = 10 SD3 = 10 + GSM Link to comment Share on other sites More sharing options...
Rulland Posted February 1, 2009 Share Posted February 1, 2009 Rough price on an SD2 and 3? Link to comment Share on other sites More sharing options...
angellonewolf Posted February 1, 2009 Author Share Posted February 1, 2009 hi and thank you all for the replyes might have to go for the texecom ? or mevier any help with the wiring is it standard throught most panels and any info on the what is 3 trigger inputs programmable as active high or low i assume set alarm off when volts are 0 or +?volts thanks angel Link to comment Share on other sites More sharing options...
james.wilson Posted February 1, 2009 Share Posted February 1, 2009 hi and thank you all for the replyes might have to go for the texecom ? or mevier any help with the wiring is it standard throught most panels and any info on the what is 3 trigger inputs programmable as active high or low i assume set alarm off when volts are 0 or +?volts thanks angel go for one of the menviers (ie 1, 2 or 3) All diallers wire basically the same trigger wise you are right. securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
angellonewolf Posted February 1, 2009 Author Share Posted February 1, 2009 All diallers wire basically the same trigger wise you are right. with the power installed can you install only the bell output to the 1 trigger to activate the alarm dialer if you want to install to an older alarm panel with most of the dialers Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.