Guest sparkster Posted May 23, 2004 Share Posted May 23, 2004 Just aquired an unbranded bell box with no instructions.Connections as follows; A - D + B SW- T RETURN SEPARATE STROBE UNIT WITH + AND - CONNECTION I believe A= Bell trigger D=12V B= ? T= TAMPER RETURN Strobe +=12V and - =Strobe trigger WOULD APPRECIATE ANY HELP Link to comment Share on other sites More sharing options...
norman Posted May 24, 2004 Share Posted May 24, 2004 Hello, A & D are Pos & Neg hold off B is neg trigger and T is tamper return (should be neg!) I think Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
BUSTER Posted May 24, 2004 Share Posted May 24, 2004 Don't know which panel it is but norman is right with his suggestions Any comments / opinions posted are my opinion only and do not represent those of my employer or Company Link to comment Share on other sites More sharing options...
black knight Posted May 24, 2004 Share Posted May 24, 2004 ditto THE BLACK KNIGHT "Any comments / opinions posted are my opinion only and do not represent those of my employer or Company." Link to comment Share on other sites More sharing options...
DGMarsden Posted May 24, 2004 Share Posted May 24, 2004 That sounds right to me! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.