miaren

If youve got the engineer code, then your in luck. If not - best to call someone in.

Why do you want to disable the led. Its only the thief who'd see it....then its too late.

Found it.. The Arrow 72. One image ive seen shows it being used with 2.5 T&E

I would if I used one. Someone makes a staple with a "small plastic bridge" for want of a better description, so it only goes as deep as the leg. Hence it wont crush the cable. Think Ive even seen it advertised for Sparkies?

I've seen coax guns used, its got a much larger than staple than used in the rapid 28.

as Mother always said..Pay attention.

Could prove useful round here !! :P

Not yet, just wet string.

Years ago I did some work in the local hospital morgue on the Access System. From the day the system was installed they thought they had a ghost meddling with it with lots of banging, with doors locking and unlocking on their own... Hospital Services had fitted the kit, and after some investigation I found the problem. One 2A PSU was running 3 Double mags @1A each. Obviously the doors were taking it in turn to lock and unlock. A big fat 5A PSU fixed it... I can imagine it was quite a bit spooky! (did make me laugh though ) Worst but, apart form the guests, was the 70VAC across the Ceiling Grid and the PSU Earth. Oohh that hurts.. Hospital services didn't give a $h1t...

It sure looks like an R8, but my old manual shows on-board fuses and a central tamper switch on the pcb. You've probably a newer version/production of the R8. Good luck