-
Posts
184 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by WDT
-
-
On 7/31/2016 at 11:35 PM, MrHappy said:
I'd put the red on + & use op1 on black programmed as something suitable?
But then again it's late & I've been drinking....
I agree use opt1 which is next to the spk connection and program it as bell in wintex in outputs, panel outputs, area, option 28.
-
I wouldn't use it as a dummy, I would bin it and get a dummy one the same as what your going to use as you live WD.
-
Very interesting
30% had not batterys in the smoke alarms well you can not help some people,
-
I drop in a EN back to BS joke and start a long thred on it,
I did know BS was in front but not so funny HA HA
-
On 6/15/2016 at 10:12 PM, al-yeti said:
You mean country, after brexit your all in trouble m1&m40 will have border control
Just as we all learnt EN50131 it will change to BS again
-
2 minutes ago, al-yeti said:
your paying for the technical skill (from some)
Ha ha (for some) is the finger pointing my way .
I might just about get out of bed for 500pound a day. but not until 10am and finish by 4pm. .
-
I like the food comparison,
I would also go with al-yeti give the pros and cons of a pro system over the yale tat, and quote £1000 for an hours work lol
-
The income is just flowing in for you,
The good news is next time they can sit and watch it all happen
-
7 hours ago, norman said:
Insurance companies are like banks, all good when you are giving them your cash, but under the skin they are all parasitic ********.
I couldn't have put it better myself, I have had 5 people drive into the back of a car/van I was driving and 1 when i was not in the van in 10 years, I am now classed as a higher risk and am being bent over for it, I cannot help it if 4 women 1 male drunk driver and 1 male cannot not drive.
Now after the last one I am fighting to get my loss of overtime as i have only been doing basic hours to give me chance for my neck to recover but seeing it's still playing up abit is going to take the full year the physio said it would,
-
Do you ever feel your having to go though life holding their hands, They should update you, It's all their fault,
But in the world of crime this is now seen as a good target, Oh boy are they going to get a shock when Mr policeman turns up 4 hours later
But repeat business for you so all good,
-
A chargable call out.
Poor show from keyholders, Number 1 not taking the call when system activated and then not knowing the system had been set off, Well some people you cannot help.
-
see the modern world people don't want buttons, it's what killed the nokia 3210, I miss snake
I think the honeywell looks ok, But it's all about your buget,
-
Hi
I would read the all the installation instuctions page by page, Understand it before setting up on the bench,
The DIY systems Yale and Response are aimed at anyone who can screw a box to a wall, and very basic setup
The Texecom is well known with the pro's allows more options then the DIY kit, this is where programming the panel can be a mine field for some people depending how you understand the instuctions,
I am guessing it's a elite 24 panel,
-
Thats ok,
People on here don't mind trying to help,
I understand it's a lot of info and work involed, Time vs cost, your time is free so to speak, I understand wireless is quicker to fit.
-
The gsm dialler can be taken off to save some and can just be added when needed, Mr happy has done some leg work for you,
I would say to do a sketch of your house work out if you had no budget what you would do and then you can get the wiring in place for when you can afford to add more,saves having to keep disturbing the same area
8 circuits in main control,
2 circuits per keypad
8 circuirts per expander,
-
2 minutes ago, PeterJames said:
Cameras come free with phones nowadays
The camara is free, 500+ pound phone is it really free
-
I always change the locks on a new property, People hide keys in gardens and stuff, who had keys before, Have keys been lost so who has them,
I agree if people want in they will, All you can do is make it as hard as possible so they go to your neighbours house instead ( Share the love)
-
8 hours ago, MrHappy said:
Yep them ones,
8 hours ago, MrHappy said:This makes me cry, but its was the same when i was fitting car alarms in the late 90's we would be expected to fix cheap **** ( sparkrite) and they thought it would offer the same as our pro kits.
-
-
9 hours ago, al-yeti said:
You get the leads with the lexia or just software ? It can be funny
Wdt where you get 1200bar from?
Ha Ha I mis-typed and you spotted it, it's full pressure is more like 1600 bar
-
8 hours ago, MrHappy said:
I've enough work but under staffed to start with,
Mended the van yesterday.... engine light has been on months, after a week of looking I found my cheapo elm327 scanner lead & then looked the fault codes on the internet
P0093 - Fuel System Leak Detected - Large LeakP1351 - IDM input circuit Malfunction/Ignition coil control circuit High voltage (Siemens system - Pre/Post heating relay circuit. Relay not controlled and glow plugs supplied).
Whipped the plastic engine cover off & had a look how hard replacing glow plugs or the relay would be, had wipe around the top end as there a small amount of oil present, guess the oil might be diesel from the bolt which secure an injector, checked 'em with a torx bit on a ratchet & no.1 is very loose & no. 3 is quite loose.
Fire the old beast up, no faults present, press the reset button & volá engines light is off & remained for 100+ml of chasing around happyland today,
I'd bet the tame mong in my local garage would have charged lots & taken a long time to mend it, call me Dr Diesel
Of course the garage would charge you, unless you have a maintence contract with them, Ha Ha
P0093 is for fuel system leak but if it comes back can also be for blocked fuel filter and may have code p0087 come up.
I would suspect if you had a leak at the injectors, for it to bring up the code it would have had to be more then damp,
I am guessing it is common rail set up, be carefull as system pressure is 300 bar ish at idle going up to 1200 bar at full.
Does the elm give you live readings, they can be so useful, I use the bosch kts570 even a tame mong can use it but takes a week of training to learn it.
-
"If i brought my own towel's " I am so trying that one
-
Thanks for the photo, I did wonder if that was what you had done when you said the wiring colours, Sometimes a pic says a thousand words
-
8 hours ago, QSXS said:
I am quite new to Texecom, but I find Wintex quite good, I would hate to have to program a system by the RKP, But It am get better at it.
I am assuming you are talking about a Elite 24 running V3.01.
I am assuming you are connecting Z1 to Alarm and Z2 to Tamper, or are you using the AUX Fault for the Tamper?
Although, I would question if you have rewired the system, why you are not using the EOL wiring??? )(Unless you have more than 3 Contacts per circuit). The diagnosis is much more intuitive with this configuration.
Connect and open the Diagnosis, You can view the all the zone resistances in this window.
If you are still stuck, I would be happy to look at your config, just PM me.
Also Texecom Support is very good. (assuming you are an installer?)
I was thinking how is the tamper done as on the 24 it's so much more work not using end of line,
I was hoping for a photo
Removing sounder cover
in !!..DIY Installers..!!
Posted
sorry for pointing it out.