Lwillis
-
Posts
2,615 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Posts posted by Lwillis
-
-
Sounds like you've enabled something that you shouldn't have.
-
Are you using any comms on the system?
Sounds like you've got Arc/SMS enabled.
Disable that and try again
-
Better of with the LAN module IMO.
pstn module isn't compatible with the app panels and the wifi module isn't either due to the metal panel- they were on about releasing a wifi aerial but not sure if it's out yet.
-
Not worth taking it over if it's one or two systems with those in and even then you'll need to flash it.
better off swapping it out.
The speaker outputs on them go sometimes -goes into full alarm even when unset without warning.
-
Yea take over a few over the years.
-
Speaking from past experience you would be better of changing the unit out -Upgrade it to UDL while your at it too.
Its usually a ball ache getting them transferred.
-
8 hours ago, al-yeti said:
That's the one
Took you a while???? Admit it the hkc software is far better than galaxy suite so you should got it done quicker
You still buying direct?
No I mean it sat in the box for a few a month.
It was up and running in an hour when I eventually got round to it
-
55 minutes ago, al-yeti said:
I still won't remove the dimension at home lol might be laziness
Tookme a while to sort it out lol was putting it off for weeks.
-
HKC apps is the best one IMO.
nofitications are spot on and very fast.
ripped out a galaxy to fit HKC at home.
-
9 hours ago, PeterJames said:
It really isnt like that, its more down to sony, hik, ect selling their rejected chips ect, and they are reused to make cameras. Most of the cameras China sell are assembled to order not manufactured to order, it really is a case of you get what you pay for because there are variants of grade of rejects from good to poor, and the cheaper the camera the cheaper the chip they used. Many of the recorders are the same firmware but I've never found Dahua or Hik re-branded, I buy Seetong as a budget recorder. When Goolink was changed to look exactly the same as the Hik mobile software four weeks later it was back to its original design. Even the mobile phones in China are not what you think.
Fitted a few HIK rebrands over the years there is atleast one out there with the same firmware tho.
-
All master blasters must be fitted directly above the keypad for use on bell tests
- 4
-
7 minutes ago, Litch90 said:
Not on a mid terrace mate.. Who actually installs a full fire panel system in their own domestic property?
Used to service a gent Vigi system in a domestic in the sticks.
However it was a stately home with outbuildings etc.
Owner built it from scratch and had a full set of drawings for fire intruder and the CCTV.
-
As above most companies can take them over if it's not a LeSecure.
Where abouts are you maybe there's a member here in your area who can help.
-
4 minutes ago, al-yeti said:
Yeah it does , who you buying from? Maybe they can send you evaluation quantam
You could remove the pillars right of psu in panel will dualcom fit then? Or they just to big
Buying from alarm supplies , had Paul up to see us and had a 1070 kit to try. Which im warming too....
Not sure if cutting the pillars would be enough , the dc6 units are even better than the current ones.....
-
3 minutes ago, al-yeti said:
Quantum? Great panel for replacing the all in one , switch to wireless and use bell cable etc, I get many who want to change from all in one panel
Hkc well overall better than rest , above all its not available to public, that's main selling point , panel can be locked customers don't mind that either ,
But if they can make it do a few things the dimension can do it would top it off
Keypads not pretty but customers like the solid hinge which most pads snap
Buying direct ok, but I got some bloke up north who is allowed to sell to me so more flexible when single items needed for small basher like me
1070 - I wouldn't mind seeing how you manage cables inside , as you pros know how to dress them up and gives me motivation to improve
Good to hear
The 1070 is tight got cables and signalling (couldn't fit a Dualcom inside one the other week)
Might be easier on a new install with plenty of length on the cables but these were panel changes (f'ing nightmare)
Does the quantum take the WIFI cards?
-
On 16/04/2016 at 9:49 PM, al-yeti said:
Just sold another quantam70 today cracking little panel
I tell all my customers don't attach to insurance to save £20 as it will cost you more when you forget to set and they don't pay up, even the ones who go with a urn don't bother with the insurance discount these days because they know its not worth the £20
What do you think of them?
-
On 24 April 2016 at 7:37 PM, secureiam said:
Anyone tried the new pyronix wifi module yet and wireless keypad?
Old thread but yeah wifi module is good -range a bit limited tho
and the wireless keypads are ****.
Fitted 2 HKC 1070 recently - reminds me of the aritech CD gear but great panels non the less
-
1 minute ago, james.wilson said:
Id add look at numbers, how many fail vs how many fitted?
Not sure but id say less than 1 in 100
Probably had a few in the last 5/6 years.
-
James, -cant say I've had many issues with the KX series, might have replaced a few but notning of note.
-
9 hours ago, al-yeti said:
Spot decoder will make it expensive no?
Less than £100
-
I'd go NVR in garage in a secure cabinet and a Spot monitor decoder in the house via the ethernet link.
As above NVR should then always have recordings
-
6 hours ago, datadiffusion said:
Ouch! Does the Mini suffer from using '0' rather than Zone 1, which as Scanny found out can't be transmitted via SIA? :doh:
Don't think so, wouldn't matter if it did as the mini doesn't have any Comms on it anyway.
-
You'll need a 46,1 ZEM8 & A ZEM-WE
the 46 only has 8 zones onboard against the Euro mini 10 so bare that in mind
-
As above your best option would be swap out the mini for a 46 and add a wireless ZEM Instead.
How To Add New Front Door Sensor to Pyronix Enforcer
in Control Panels (Public)
Posted
Programming in the new sensor is an engineer only function.
Any local company will be able to takeover the system and do this for you.
Contact a couple of companies for quotes for a callout