[Panel ID help!]

Just watch for output 1 inverting when you go into output test. 

It wont clear until you exit engineering 

[Integrating Paxton Access system to Alarm]

Fit an external prox reader on the videofied and ur fobs to set and unset that 

 

Or fit a proper CCTV system and use forced door from Paxton or line detection etc onto the NVR Alarm input to generate the alarms 

[Help guys]

The PIR going red is because it’s seen movement 

those have a red LED in them , some have BLUE leds. 

 

Contact a local alarm Co. for assistance 

[Dedicated Micros DVR NetVu App iOS11]

20 hours ago, BUSTER said:

Hik will still not be able to control down the coax domes

Not without replacing the domes with TVI stuff

[Dedicated Micros DVR NetVu App iOS11]

12 hours ago, Dick said:

Indeed it is but stupid I’m not. 

Could  you post a screen shot of the footage? 

 

[Dedicated Micros DVR NetVu App iOS11]

46 minutes ago, sjsturner said:

I did think that myself, haven't seen any of this kit about for years, I was led to believe that back in the day DM was really good...

 

Aye apparentley it’s the dogs ******** but I’ve never seen one in a decent working order for about 7/8 years now.

 

 

[Dedicated Micros DVR NetVu App iOS11]

Surely nobody is still fitting these?  Didn’t think any of them would be on clients phones for remote viewing. 

The live images are shocking never mind trying to view one remotely... 

 

[Magnetic Contacts Sticking on Un-Opened Windows]

26 minutes ago, Eugene's DIY Den said:

I fitted the contacts, so there was TLC involved! However they seemed to fail after a few years on the windows which weren't opened. The currents involved are only milliamps, so they hardly weld closed?

The metal pins inside the glass tube just doesn’t Spring back. 

Replace the contacts job done 

[HKC blocking dial capture units]

It's been in about a year I think.... maybe less 

 

can't have 0 in the code -Wife won't use system due to that and doesn't want a fob 

wont take 1k/1k EOLs without fitting extra resistors in the panel 

 

Redecorating throughout so fitting a more cosmetically friendly rkp

 

[HKC blocking dial capture units]

10 minutes ago, MrHappy said:

 

get it on ebay.....

 

data can then post a link & disapproving comments on tsi  

Sounds like a plan to me 

 

7 minutes ago, james.wilson said:

if its not locked ill have it

you working on a weekend?

Isnt locked but will need defaulting 

 

[HKC blocking dial capture units]

I'm ripping out a 1070 at the weekend if anyone want it otherwise it's going in the bin.

[From Unknown PIR to Dual TEC]

1 hour ago, MrHappy said:

 

your rate KX? Dt's ?

 

Yea fit them day in day out and have no issues. 

 

[From Unknown PIR to Dual TEC]

23 hours ago, GalaxyGuy said:

 

What type of problems ?   Anti mask ?

 

False alarms mainly 

ripped a load out in a warehouse and went back to pyronix 

 

[From Unknown PIR to Dual TEC]

Had nothing but issues with those Honeywell detectors 

the older ones were better IMO. 

 

[Risco agility 3 - remove remote access?]

Guessing by your area i might know the alarm co in question. 

PM me if you get stuck.

[Galaxy G2-12 Zone Restore]

2 minutes ago, al-yeti said:

Or install a dimension 

 

Bit much for a domestic or small commercial tho 

[Galaxy G2-12 Zone Restore]

3 hours ago, MrHappy said:

don't use it....

 

Can't you define what content is sent ? & whether it restores ?

 

You can but cant disable restores on a G2.

 

Ask EMCS to setup the restores as non filtering and to abort on Open. 

 

 

[Galaxy G2-12 Zone Restore]

Get the arc to make the restores non filtering 

 

 

[Dahua Newbie]

Could be a few things as above check the psu,bnc ends 

is it copper cable or the chepo stuff?

 

[Dahua Newbie]

How are they wired? Cat5 with balauns or shotgun?

[Pyronix Keypad]

I Normally for the 064 didn't think they did the other ones anymore 

 

there used to be a NON Prox version for the Euro mini .

[Panel ID?]

22 hours ago, datadiffusion said:

 

Not on any UK model and only on later ENs, and all PDs.

 

 

 

Never took that much notice what variant they were if I'm honest mate.

 

[Panel ID?]

I'm sure you could change the banner on the 9651- option 183-IIRC. 

 

Havent done one in a while tho 

[How To Add New Front Door Sensor to Pyronix Enforcer]

Not sure the information is in the manual unless you already have the engineer code. 

 

As above we cannot give out defaulting information here. 

 

[How To Add New Front Door Sensor to Pyronix Enforcer]

Agree with James, I'd recommend taking out an annual maintenance contract and have the system serviced regularly, this is more important on wirefree systems.