Jump to content
Security Installer Community

aissecur

Trade Full Member
 View Profile  See their activity

  • Posts

    302

  • Joined

  • Last visited

  • Days Won

    5

 Content Type 

Posts posted by aissecur

    Risco, Upgrade Or Replace

    in Guest Forum

    Posted · Edited by aissecur

    Its not a bad system all in all, and if cost is the main consideration I would just replace the keypad.

    Be warned there are two types of keypads available - 4 wire & 6 wire ,depending on how old your panel is, it may only accept the 6 wire version (6 wire now obsolete but I've seen an odd one listed on eBay)

    The newer versions accept both the 4 wire & 6 wire keypads.

    They do a blue LCD version now which looks good.

     

    Do you know when it was installed?

     

    Have you more than one keypad?

     

    Do you set with Gtag Fobs or an ACE?

    Cp8L Alarm System

    in Introduce Yourself

    Posted · Edited by datadiffusion
    Public

    If the engineer has set the panel up for engineer reset on tamper & system is tampered it usually says "Service Due"

    If it is service timer, usually warns 2 weeks before then says lock out, when you try & set it will say use code (4 random numbers) I think you can [...] & allow to be used for a further 2 weeks but ultimately think it will be an engineer call out..

    Honeywell Vcl Orbiter White Out

    in Guest Forum

    Posted

    Hi, I have a site with two Honeywell VCL PTZ domes (Orbiters). The domes run back to a 8/2 maxcom & are controlled via a Honeywell (VCL) keyboard.

     

    The camera's are not often moved but if moved during the day occasionally in the morning one of the camera's picture is whited out. If you press any preset button  then the picture comes back (Obviously this seems like an Iris issue)

     

    I have ensure both camera's are sync'd (Via the VCL menu)

     

    I have seen this a few times previously and was wondering if anyone had a any advice / solutions?

     

    Thanks in advance

    Vista Quantum Dvr Keeps Shutting Down.

    in Guest Forum

    Posted

    Hi,

    Many thanks for your reply…

     

    Majority of the camera inputs are via Cat 5 (Baluns), I’m proposing to put Hum Eliminators on the two coax inputs so this would resolve any phasing / earthing issues …

     

    Also will probably do a PSCC / Earth loop at the socket outlet that supplies the CCTV equipment just to check there is no iffy readings..

     

    I’m also thinking of reloading the latest firmware again onto the machine & swap out the HDD and format.

     

    I just found it suspect that when connected via LAN it rebooted so many times…

    Vista Quantum Dvr Keeps Shutting Down.

    in Guest Forum

    Posted

    Morning Gents,

     

    A customer of mine has a Vista (H264) Quantum Dvr (The smaller dvr with no buttons on the front of the unit, everything is mouse controlled)

    The issue i have is the unit has started rebooting itself 10+ times a day & the customer is not a happy bunny.

     

    The PSU is an external 12v one which i have changed (Made sure it was 12V  5amps). I have not changed the Hard drive .

    I told the customer to remove the LAN connection out of the back of the DVR, this apparently reduced the number of times it rebooted itself... to an odd time.

    The problem is the customer uses the remote view on his IPhone so need to resolve this.

    As far as I’m aware the unit has the latest firmware installed but can check & reinstall if required.

     

    I have a few thoughts - is the unit being hacked as you can remotely shutdown these units??

     

    I have a Quantum unit myself at home & have noticed lately it reboots itself once a day

     

    Has anyone had any similar issues & can advise how i resolve this?

     

    Thanks in advance

    aissecur

    Pyronix Enforcer Range

    in Guest Forum

    Posted

    I have a Risco Agilty panel in the stores so I could try this!

    I could put the wireless keypad in the garage also so they would have audio confirmation when the alarm is set / unset.

    Do Risco have a wireless dualtec yet? I have lost count of the amount of stadard wireless pir's i have fitted...


    Never really had any issues with them..

    Pyronix Enforcer Range

    in Guest Forum

    Posted

    Hi, thanks for your reply...

     

    I thought it was a challenge...

     

    I don’t think a perfect clear line of sight is achievable from the property itself.

    The property is a little terraced cottage and the garage is located round a little corner. 

    I’m thinking do Texecom do a repeater i could install in an adaptable box and mount on the customers neighbours property next door (at a suitable height) that way line of could be achieved. (not sure they would be happy with a bellbox on there wall acting as a repeater ) . I know it sounds a bit adhoc but i know the neighbours are family so providing the repeater was installed discreetly i don’t think it would be an issue... but would still be approx. 55 - 60mtrs from the garage.


    Do  you still think there would be range issues at 55 - 60mtrs with Texecom ricochett?

    Pyronix Enforcer Range

    in Guest Forum

    Posted

    Hi all,

    I have been asked to look into installing a wireless system to protect a garage that is approx. 60 - 65 metres away from the main property (down a back alley)  The logistics of getting a armoured cable to provide power to the garage is a no no.  The garage is not in perfect line of sight from the main property.

     

    So i thought of maybe installing a Pyronix enforcer panel in the entrance hall of the customers main property  (as i can easily pick up a 230v supply from there)

    Then install a wireless bell & wireless contact on the garage. The system could be armed / disarmed via a fob or main panel in the house.

     

    My concern is the range and whether it is too much for the kit ...I know the pyronix detectors have a readout on them showing signal strength when they are learned so i could test them that way but i just wondered if anyone had undertaken a similar install or could advise if another manufacturers kit would be better suited?

     

    Thanks in advance

    Strange Request.. Alarm Satellite Dish.

    in Guest Forum

    Posted

    Hi, how about using a Optex VX402 REC external detector.. It is a very stable optex external PIR with a voice recording facility to frighten the bejesus out of any little blighters attempting to take your dish...

     

    You could mount the unit to the least physically accessable side of the dish & bracket off the wall with unistrut cantilever arms and face it sidways on to the dish (which would hopefully reduce false activations from any Cats)..

    You could connect it to your Risco CPX panel or just rely on the voice output from the unit to scare away any would be theives..

    Just a thought for you to consider...

    Interface A Securilite Voltek 1804 Pir With A Gjd Sapphire 1500 Mk3 Controller

    in Guest Forum

    Posted

    Hi, Many Thanks for the reply...

    Good point.. I just need to find out what the GJD Opal detector outputs when in alarm... Im almost sure its  0V in alarm.. I will get the mutlimeter out when im next on the site.

    A relay is a good idea.

    If not using a relay i would have to check what the opal outputs when in non alarm state, as if its not 12v i fear the introduction of a Voltek pir with 12v flowing in non alarmed state may cause some internal damge to the GJD controller..

     

    Thanks Nick

    Vista Quantum Qp08-1000Hf Factory Reset

    in Guest Forum

    Posted

    Hi, I have a Vista Quantum QP08-1000hf that gets stuck at the loading programs page & does not progress from there.

    I have tried  swapping out the PSU & hard drive from a  working Vista unit & this has made no difference, a collegue of mine said there is a way to default the unit and that this may correct the issue...

    My question is has anyone had a similar issue? If so how did you sort it?

    And secondly does anyone know a way of reseting the DVR?

     

    Thanks in advance

     

    NIck (aissecur)

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept