Guest Joe D Posted March 28, 2006 Share Posted March 28, 2006 I have got a sounder it is a lyntek twin piezo unit and would use it for a internal sounder it is also known as a sound bomb would ot be possible for my installer to connect this to my Optima Compact G3 panel the only sounders i have got is the one built in the panel and the external sounder which is a aztec 1000 bell box made by kinetic sounders as i dont know what current consumption the external sounder takes i know that the lyntec is 95ma current draw. the only problem is i dont know what my panel max ma current consuption is for the sounders. Also the lyntek sounder has only got two short wires a red and a black how would my installer connect this to the panel? Link to comment Share on other sites More sharing options...
FASTCAR Posted March 28, 2006 Share Posted March 28, 2006 There shouldnt be a problem adding a sound bomb, but your installer should check the current to be on the safe side.He would connect red to 12v+ and black to SW-ve. Regards. Link to comment Share on other sites More sharing options...
Adi Posted March 28, 2006 Share Posted March 28, 2006 Or bell + and bell trigger. I really can't be ar**** with it anymore. Link to comment Share on other sites More sharing options...
kka Posted March 28, 2006 Share Posted March 28, 2006 D = +Ve supply (12V) red wire B = -Ve Sounder trigger black wire your installer should beware of mains inside the control panel, always isolate before carring out any alterations. he / she should already know this, it is good practise. Kevin Scott. Owner of KK Alarms...... Installation .. Service .. Repair ...... Thoughout.. Northumberland and North Tyneside ..... Tel:01670 361948 (call diverted after 15 seconds) or 07947444114 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.