Guest Posted July 25, 2005 Share Posted July 25, 2005 Some people really should look at the dates before replying. Link to comment Share on other sites More sharing options...
Mavrick_001 Posted July 25, 2005 Share Posted July 25, 2005 Maybe she's still undecided!!! Bi*ch!! Not Charl.. CCTV Intruder Access Control Tony Hughes, Proprietor, TRADE MEMBER Link to comment Share on other sites More sharing options...
FASTCAR Posted July 25, 2005 Share Posted July 25, 2005 My AJ600N A1 alarm has failed and I was reading this correspondence with interest. The failure is that the transformer has burned out. I have read with interest that a failing battery will draw too much current which could explain why the transformer burnt out. I do not know what voltage the transformer gives out (yes I know I can count the windings but this is such a fag). Does anyone out there know what the secondary ac voltage should be? I tried a 10v rms transformer, but after a few seconds with all the lights on (when I guess the microprocessor is resetting itself), the alarm goes off with only the power light on and i cannot stop it. My guess is that 10v is too low. Can anyone help? 62301[/snapback] 18volts a.c. but it really is a poor excuse for a panel... Regards. Link to comment Share on other sites More sharing options...
Guest Chris.Hudson Posted July 26, 2005 Share Posted July 26, 2005 thankyou, I will try 18 volts. I will also need a new battery as it does not take any charge current. Maybe it is time to change it after all. Link to comment Share on other sites More sharing options...
Mister_Dave Posted July 26, 2005 Share Posted July 26, 2005 Yes change it. Post your location and someone here might be able to help. Dave Oxendale York based security systems engineer. Link to comment Share on other sites More sharing options...
Nova-Security Posted July 26, 2005 Share Posted July 26, 2005 Maybe it is time to change it after all. 62450[/snapback] Sense at last. www.nova-security.co.uk www.nsiapproved.co.uk No PMs please unless i know you or you are using this board with your proper name. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.