Guest mannivw Posted January 31, 2005 Share Posted January 31, 2005 Hi I have the Protector xtra X10 wireless alarm system fitted to my home and recently I bought a new //.National Installer.// Bell Box with siren and strobe, made by Bentel Security, part# TS100. My alarm system is 240v but the Siren is 13.8v. How do I connect this up to my wireless alarm system? Has anyone else done this or similar? Thanks Link to comment Share on other sites More sharing options...
morph Posted January 31, 2005 Share Posted January 31, 2005 You will need an X10 universal module and a 1amp power supply, in order to do this. Link to comment Share on other sites More sharing options...
norman Posted January 31, 2005 Share Posted January 31, 2005 Hi mannivw, With all due respect if you are asking basic questions such as voltage matching I would seriously consider getting a local company to wire the siren. It may not cost too much and could just save your life! Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.