The splitter is in an external location and the original POE switch connects other devices so is impossible to move due to the location of the other devices.

 

Bigger poe feed then? 

On 07/08/2024 at 08:41, Mike TV said:

I have an installation which runs PoE around 80m to a PoE splitter, then off to one camera 1m away and another camera aroun 5m away, which was working successfully for a number of months and now isn't. Any iseas as to why this would stop working?  I am considering installing a new PoE switch to replace the splitter, would this work?

You may need to verify if the voltage at the camera end has dropped below the required level (usually 48V for PoE). You can test this using a multimeter or check the power consumption requirements of the cameras.

Yes, installing a PoE switch instead of the splitter could resolve the issue