Skip to content
View in the app

A better way to browse. Learn more.
Security Installer Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Accenta Gen4 Honeywell alarm

Alarm novice
in Control Panels (Public)

Featured Replies

Hi folks, moved into a new home and managed to change codes and have the alarm working. however am unable to use Part alarm, so that upper floors can be isolated at night. Manual says enter code, Press P and the exit tone should stop , allowing you to choose which zone you want to part alarm. However the exit tone doesn't stop and no new menu options come up. Help...

7 minutes ago, Alarm novice said:

Hi folks, moved into a new home and managed to change codes and have the alarm working. however am unable to use Part alarm, so that upper floors can be isolated at night. Manual says enter code, Press P and the exit tone should stop , allowing you to choose which zone you want to part alarm. However the exit tone doesn't stop and no new menu options come up. Help...

Don't you have to set the zones up for part set first? In settings ? Then that might work ?

  • Author

I didnt want to mess with the original settings, as I am sure the previous owners had part set up already. I did a walk through test and all the different zones were picked up. However what you suggested may be worth doing. thanks

Reprogramming it all is best , to make sure it all works to how you want it to, but If you got the budget get rid of it when you can 

  • Author

may have to go into engineering settings for that which could prove tricky or need another code. anyhow why do you suggest getting rid or replacing this one? not fit for function? alarm for a 3 storey townhouse in a gated area ?any recommendations ? thanks for your responses

 

as al says you will need to setup the partsets in programming. they are dsiabled by default

securitywarehouse Security Supplies from Security Warehouse

Trade Members please contact us for your TSI vetted trade discount.

22 hours ago, Alarm novice said:

may have to go into engineering settings for that which could prove tricky or need another code. anyhow why do you suggest getting rid or replacing this one? not fit for function? alarm for a 3 storey townhouse in a gated area ?any recommendations ? thanks for your responses

 

It's old panel dude , just like anything else it may do the job if it works for a bit , but realistically I am sure as SW would say not using a Nokia version 1 to post your messages .......

 

DIY although one way I can only say go scantronics ion which still uses a free based app system and is less complication other systems 

 

Others that are free either poor hardware or complicated programming 

Create an account or sign in to comment
Go to topic listing

Account

Navigation

Search

Search

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.