Naeem ahmed Posted April 22, 2023 Share Posted April 22, 2023 Hi I need abit of advice please I have put the front door contact on and I went into define zones and selected delay 1 and then define panel and setup the entry delay 1 and exit delay times and it works fine in away mode but I don't want it to work in home mode at night please can help me please I have tryed lots of setting s but nojoy Kind regards Naeem Quote Link to comment Share on other sites More sharing options...
al-yeti Posted April 22, 2023 Share Posted April 22, 2023 57 minutes ago, Naeem ahmed said: Hi I need abit of advice please I have put the front door contact on and I went into define zones and selected delay 1 and then define panel and setup the entry delay 1 and exit delay times and it works fine in away mode but I don't want it to work in home mode at night please can help me please I have tryed lots of setting s but nojoy Kind regards Naeem So home mode , you don't want to arm the front door only other sensors get armed? Quote Link to comment Share on other sites More sharing options...
Naeem ahmed Posted April 22, 2023 Author Share Posted April 22, 2023 4 hours ago, al-yeti said: So home mode , you don't want to arm the front door only other sensors get armed? Yes that's correct any idears please would be greatfull Kind regards Naeem Hi yes that's correct any idears please Kind regards Naeem Quote Link to comment Share on other sites More sharing options...
Naeem ahmed Posted April 22, 2023 Author Share Posted April 22, 2023 Hi yes that's correct any idears I have been through the manual but still no joy Quote Link to comment Share on other sites More sharing options...
al-yeti Posted April 24, 2023 Share Posted April 24, 2023 On 22/04/2023 at 18:20, Naeem ahmed said: Hi yes that's correct any idears I have been through the manual but still no joy To be honest I can't see how you will do it Basic panel with no area settings??? Home mode and delay1 ,2 etc seem to only have certain options What are you arming on home mode ? Quote Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted April 24, 2023 Share Posted April 24, 2023 Delay circuits are always part of an entry route, they are basic domestic panels. Quote Link to comment Share on other sites More sharing options...
Naeem ahmed Posted April 24, 2023 Author Share Posted April 24, 2023 16 hours ago, al-yeti said: To be honest I can't see how you will do it Basic panel with no area settings??? Home mode and delay1 ,2 etc seem to only have certain options What are you arming on home mode ? Hi thanks for getting back to me if I buy the powermax 30 will that have area setting so I can omit the ones I don't want to arm at night Quote Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted April 24, 2023 Share Posted April 24, 2023 There is no such thing as a Powermax 30. Quote Link to comment Share on other sites More sharing options...
Naeem ahmed Posted April 24, 2023 Author Share Posted April 24, 2023 34 minutes ago, sixwheeledbeast said: There is no such thing as a Powermax 30. Hi thanks for getting back to me I take it the powermax complete does not have a part set options Quote Link to comment Share on other sites More sharing options...
Naeem ahmed Posted April 24, 2023 Author Share Posted April 24, 2023 2 hours ago, sixwheeledbeast said: There is no such thing as a Powermax 30. Sorry powermaster 30 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.