Ian16 Posted March 18, 2023 Share Posted March 18, 2023 Hi, first time posting here and a complete novice in the alarm department. We have a Honeywell system for the house which was installed in 2016. Recently we had issuing setting it which lead me to discover the main panel battery needed replacing (error on my part for the lack of servicing). I've sourced the right battery and replaced whereby the outdoor bell went off and after putting the new battery in and the power back on the alarm went off however, the keypad downstairs is blank but had the green power light on. Any suggestions in what this could mean? Quote Link to comment Share on other sites More sharing options...
al-yeti Posted March 20, 2023 Share Posted March 20, 2023 On 18/03/2023 at 14:31, Ian16 said: Hi, first time posting here and a complete novice in the alarm department. We have a Honeywell system for the house which was installed in 2016. Recently we had issuing setting it which lead me to discover the main panel battery needed replacing (error on my part for the lack of servicing). I've sourced the right battery and replaced whereby the outdoor bell went off and after putting the new battery in and the power back on the alarm went off however, the keypad downstairs is blank but had the green power light on. Any suggestions in what this could mean? Is it flashing starts ? Perhaps you connected battery wrong way round at first ? I would disconnect battery and the mains , then reconnect mains and battery see what happens Quote Link to comment Share on other sites More sharing options...
Cieska Posted September 23, 2023 Share Posted September 23, 2023 Wiring issue/failure, or in some cases in alarm mode it shows blank, but accepts the PIN, then displays comes alive. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.