Hi all

 

I’m at my wits end after an evening interrupted by intermittent beeping (two tone) on my Veritas R8 alarm. The unset light is flashing. Seemingly no pattern to the beeping - seems to stop once the code is entered and I press reset but then begins again within 30 mins to an hour. Incredibly frustrating. 
 

Any ideas on how I can fix this?

 

 

Mains failure and it's running on battery.

Maybe a fuse blown inside or circuit breaker tripped.

Eventually the battery will die and trigger the external sounder.

 

4 hours ago, Foxes said:

Hi all

 

I’m at my wits end after an evening interrupted by intermittent beeping (two tone) on my Veritas R8 alarm. The unset light is flashing. Seemingly no pattern to the beeping - seems to stop once the code is entered and I press reset but then begins again within 30 mins to an hour. Incredibly frustrating. 
 

Any ideas on how I can fix this?

 

 

Panel has a low or flat battery or mains has failed 

Yep could also be faulty battery dragging the system voltage down, especially if not serviced.

If so power supply will need checking for charging rate before battery replacement.