Stephen Gibbons Posted September 22, 2017 Share Posted September 22, 2017 (edited) Hi How would you work out how long a battery will last? I have a 3.2ah battery but id like to know if it will last 24 hours. http://www.actmeters.co.uk/alarm-advice/fault-finding-a-guide/ Using the act fault finding guide i have measured the standby current as 225 milliamps. so 3.2ah/225 = 14.22 hours. is this correct please? Edited September 22, 2017 by Stephen Gibbons Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41589-battery-standby-time/ Share on other sites More sharing options...
james.wilson Posted September 22, 2017 Share Posted September 22, 2017 yes you need a bigger battery. Also A/h is based on a 24hr discharge and only while brand new you will loose 10% in the first couple of years securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41589-battery-standby-time/#findComment-468863 Share on other sites More sharing options...
Stephen Gibbons Posted September 23, 2017 Author Share Posted September 23, 2017 13 hours ago, james.wilson said: yes you need a bigger battery. Also A/h is based on a 24hr discharge and only while brand new you will loose 10% in the first couple of years 10% i cannot find anything to relate to that figure. All seems a bit confusing. Looking on the net there seems to be a few different calculations. What is meant by de-rating factor and aging factor? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41589-battery-standby-time/#findComment-468865 Share on other sites More sharing options...
james.wilson Posted September 23, 2017 Share Posted September 23, 2017 the capacity of the battery lowers with age and conditions etc securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41589-battery-standby-time/#findComment-468866 Share on other sites More sharing options...
Stephen Gibbons Posted September 23, 2017 Author Share Posted September 23, 2017 21 minutes ago, james.wilson said: the capacity of the battery lowers with age and conditions etc is there a recognised formula you guys use to calculate this please? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41589-battery-standby-time/#findComment-468867 Share on other sites More sharing options...
sixwheeledbeast Posted September 23, 2017 Share Posted September 23, 2017 If the battery is a C20 (most likely) then Ah ratings are measured over a 20 hour period. If the battery is discharged quicker than that you loose out on amp-hours. On a bells only domestic you would normally require a standby time of 12 hours with one (15 minute) activation. You also don't want to run close to that figure due to above and also ageing and environmental changes so therefore use the next battery up if within 10%. So you need the standby current and the alarm current for your calculations. Unless your firing off lots of high amperage sounders, I would estimate a good quality 7Ah battery is required from your standby values. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/41589-battery-standby-time/#findComment-468881 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now