Skip to content
View in the app

A better way to browse. Learn more.
Security Installer Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Texecom Premier Elite Digicom Outputs to drive relay

Groovy1000
in !!..DIY Installers..!!

Featured Replies

I have fully installed a Texecom Premier Elite 24 panel and am now looking for some home made 'upgrades'

 

Id like to program the Digicom Outputs to be able to signal a Raspberry Pi.  Looking at the instruction manual, the Digicom Outputs are programmable max current 100mA 'Switched 0V'.  Im just looking for some confirmation that Ive got things right.

 

My assumption that 'Switched 0V' means that it is normally open circuit and when activated, will command 12V at a maximum of 100mA?

 

I just need to know as plan to fit a relay to signal the Raspberry Pi that something has happened.

They are transistor driven outputs, the output will sink a maximum current of 100mA.

So you can drive a device (relay) up to 100mA current between 12v and your output.

If you need more current the panel outputs are 500mA whereas the Digi are 100mA

Create an account or sign in to comment
Go to topic listing

Recently Browsing 0

  • No registered users viewing this page.

Important Information

By using this site, you agree to our Terms of Use.

I accept

Account

Navigation

Search

Search

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.