kungfuman Posted May 20, 2017 Author Share Posted May 20, 2017 1 hour ago, james.wilson said: well id be looking to prove the panel, looping out the circuits. I suppose you could have a voltage on a leg. You didn't connect the battery the wrong way round did you? Nope, double checked and battery went in the same connections as the old one. 1 hour ago, al-yeti said: Try linking the tamper circuit , close everything up and see if it starts to arm How do i go about linking the tamper circuit? When i remove the unit cover, the tamper internal alarm does sound and i have to punch in the code to stop it. Quote Link to comment Share on other sites More sharing options...
al-yeti Posted May 20, 2017 Share Posted May 20, 2017 Put a loop on global tamper , and as jw said loop out every circuit to see if anything changes , then add each zone circuit back one at a time Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted May 20, 2017 Share Posted May 20, 2017 I would hazard the tamper is fine if the panel is not in alarm all the time?? As before, with a tamper, you wouldn't even be able to exit eng... It won't hurt to do it though. Going back to basics, what happens when you do a walk test, OP? (Eng Command 97) Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.