kirps Posted December 10, 2016 Share Posted December 10, 2016 (edited) HI, I have a Eurosec control panel and I am wiring up a new alarm box. The alarm box has Cut White wire for Tamper Cascade options. EOL Resistance Cut All Except Black link or Brown for 1K Green for 4K7. Do I need to cut any wires?link removed I believe this is my manual for my control panelRead more:link removed Model of alarm box Elmdene 7442 G3F If I have no wires cut the alarm bell keeps going off and on the keypad it displays alarm bell Box tamper.. Please helpRead more: link removed control box photo Edited December 10, 2016 by MrHappy links removed Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted December 10, 2016 Share Posted December 10, 2016 Can't really help without links, sorry!! Only joking, pls read forum rules etc... The instructions state; Cut WHITE link to cascade (i.e more than one live bellbox). I'm assuming not, so LEAVE the white link. It then states... Cut ALL except... So presuming you want a negative tamper return, for the panel you're using, you DO need to cut the BROWN and GREEN links. Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
kirps Posted December 10, 2016 Author Share Posted December 10, 2016 (edited) tired that but doesn't work. when the tamper goes off the siren goes off but even if you reset the alarm panel and tamper swtich the siren still goes off. Edited December 10, 2016 by kirps Quote Link to comment Share on other sites More sharing options...
Nova-Security Posted December 10, 2016 Share Posted December 10, 2016 eurosec is neg tamper return, will need a neg feed to TS Quote www.nova-security.co.uk www.nsiapproved.co.uk No PMs please unless i know you or you are using this board with your proper name. Link to comment Share on other sites More sharing options...
datadiffusion Posted December 10, 2016 Share Posted December 10, 2016 As above, assumed you'd fed neg to TS already... Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.