GemmaWilson27 Posted February 23, 2016 Share Posted February 23, 2016 (edited) Got the exact same problem as the above, same alarms and showing same display. Would love to know any solutions to get this problem fixed. --- Gemma - have moved this, please start a new thread as the old one is nearly 10 years ago (I have done this for you) There were several pictures in the thread you referred to so it might be an idea to say which on exactly http://www.thesecurityinstaller.co.uk/community/topic/15012-gardtec-change-code-any-ideas/ Edited February 23, 2016 by datadiffusion Split topic Link to comment https://www.thesecurityinstaller.co.uk/community/topic/39786-gardtec-problem/ Share on other sites More sharing options...
ElecTech Posted February 24, 2016 Share Posted February 24, 2016 Do you have the correct user code? Link to comment https://www.thesecurityinstaller.co.uk/community/topic/39786-gardtec-problem/#findComment-441478 Share on other sites More sharing options...
PeterJames Posted February 24, 2016 Share Posted February 24, 2016 Hi Gemma Welcome to the email You will need to be a little more specific, what is the display saying and what would you like to do Link to comment https://www.thesecurityinstaller.co.uk/community/topic/39786-gardtec-problem/#findComment-441481 Share on other sites More sharing options...
GemmaWilson27 Posted February 24, 2016 Author Share Posted February 24, 2016 Hi, thanks for copying this into the relevant topic. I have the following alarm, I think it's a Gardtec 370 but that's not confirmed. I have just moved in the house and as the house was empty before us moving in we were given no codes at all. I am looking to reset the system and codes so we can use the alarm. Any advice would be great. Thanks. This is the alarm I have if it helps. Link to comment https://www.thesecurityinstaller.co.uk/community/topic/39786-gardtec-problem/#findComment-441503 Share on other sites More sharing options...
MrHappy Posted February 24, 2016 Share Posted February 24, 2016 (edited) I am looking to reset the system and codes so we can use the alarm. We don't give defaulting info or manuals out, If a paying client asked me to get this system going I'd just price to replace the controls... Edited February 24, 2016 by MrHappy Mr Veritas God Link to comment https://www.thesecurityinstaller.co.uk/community/topic/39786-gardtec-problem/#findComment-441504 Share on other sites More sharing options...
PeterJames Posted February 24, 2016 Share Posted February 24, 2016 Hi Gemma You could ask the agent to ask the previous owner for the code, though that panel is so old its most likely that it was installed for the owner previous to the last and never used by the previous owner. The code can be defaulted, but it is an engineer only setting. I would recommend you call the installer (the phone number is on the bell box normally) if the installer is no longer available then call around local companies you may find one that will be happy to help, I would suggest you have the system serviced at the same time as this would ensure the system is working fully and that the batteries are in good working order. The other alteernative is to have the controls replaced with something newer this panel is at least ten years old most likely 15 to 20 years Link to comment https://www.thesecurityinstaller.co.uk/community/topic/39786-gardtec-problem/#findComment-441507 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now