jimmyb789 Posted March 20, 2015 Share Posted March 20, 2015 My Novagard 6 bellbox strobe has never worked. I think this is down to the fact the installer used the existing four core bell wire from a previous alarm and didn't wire in the strobe. However, I've heard you can still use the strobe with four core if you wire it together with the bell trigger. In the real world am I likely to get any problems (fuses blowing etc) by doing this? Quote Link to comment Share on other sites More sharing options...
james.wilson Posted March 20, 2015 Share Posted March 20, 2015 Assuming your panel can output or sink enough from its bell output then no Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
datadiffusion Posted March 20, 2015 Share Posted March 20, 2015 Once local round here always does bells in 4 core. Must save at least 4p a job. Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.