m300raj Posted February 13, 2015 Share Posted February 13, 2015 hi I did a general service of my alarm this and replace the CP battery as it was getting on to 4 years old as a precaution after which the system rebooted but would not except GMC I then thought it may have defaulted but that did not work either I can enter the engineer menu either option 7 as the engineer code will not be accepted it just bleeps after code entry and goes back to menu. Any help appreciated Raj Quote Link to comment Share on other sites More sharing options...
m300raj Posted February 13, 2015 Author Share Posted February 13, 2015 Sorry just to add it says call engineer and the tamper logo is on Quote Link to comment Share on other sites More sharing options...
james.wilson Posted February 13, 2015 Share Posted February 13, 2015 It sounds like it needs an engineer reset Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
m300raj Posted February 13, 2015 Author Share Posted February 13, 2015 Can't see how to do that can you expand Thanks Quote Link to comment Share on other sites More sharing options...
james.wilson Posted February 13, 2015 Share Posted February 13, 2015 Id guess its set for engineer reset on tamper. As it should be. Did you install this yourself? Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
m300raj Posted February 13, 2015 Author Share Posted February 13, 2015 (edited) Hi yes I did install the system so I have all the codes it just will not let me in when I go to menu 7 engineer/advanced I previously had no problems getting into the system to make changes like adjusting system time. Just all a bit strange Edited February 13, 2015 by m300raj Quote Link to comment Share on other sites More sharing options...
james.wilson Posted February 13, 2015 Share Posted February 13, 2015 I don't know that gear sorry. Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
m300raj Posted February 16, 2015 Author Share Posted February 16, 2015 (edited) Ok I think I found the problem but need help I need a anti code to reset the system Can anyone help Me with a copy of the software Edited February 16, 2015 by m300raj Quote Link to comment Share on other sites More sharing options...
al-yeti Posted February 16, 2015 Share Posted February 16, 2015 Unlikely here, why don't you ask the installer? Quote Link to comment Share on other sites More sharing options...
m300raj Posted February 16, 2015 Author Share Posted February 16, 2015 I installed it myself about 4 years ago Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.