Jim Mac Posted April 21, 2014 Author Share Posted April 21, 2014 But if any engineers in Glasgow area wish to quote, feel free to contact me, and save me from whole world if grief But if any engineers in Glasgow area wish to quote, feel free to contact me, and save me from whole world if grief Link to comment Share on other sites More sharing options...
PeterJames Posted April 22, 2014 Share Posted April 22, 2014 I would say don't mention any alarm company's engineers did a homer for you. ACME are big up here and I'm sure they would not like this. Ive edited the posts to protect the guilty Link to comment Share on other sites More sharing options...
Jim Mac Posted April 22, 2014 Author Share Posted April 22, 2014 Peter two posts after datadiffusion last post, need company name edited out also Link to comment Share on other sites More sharing options...
al-yeti Posted April 25, 2014 Share Posted April 25, 2014 you need a dualtec pir for the conservatory so forget the standard pir i assume tamper is available on other sensors or they were never wired up either? Link to comment Share on other sites More sharing options...
Jim Mac Posted April 25, 2014 Author Share Posted April 25, 2014 Hi al-yeti, nope no PIR's or magnetic contacts had any of the tamper terminals wired up, I purchased 2 magnetic contacts one to replace the existing aged one on patio doors, this is already set as an entry/ exit. And I was gonna add the other new one to conservatory door as well as installing a pet PIR, but happily could just stick with a door contact, but have this also set as entry/exit if it's possible to set them up that way. Which would mean front door, patio doors and conservatory doors would all have magnetic contacts and be set as entry/ exits, with the pet PIR's protecting all the downstairs rooms and top landing for upstairs if that all makes sense, appreciate your thoughts al Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.