MrHappy Posted March 29, 2013 Share Posted March 29, 2013 Is the engineer resetting of ATS failure a requirement for G2 ? Mr Veritas God Link to comment Share on other sites More sharing options...
breff Posted March 29, 2013 Share Posted March 29, 2013 Grade 3 only The opinions I express are mine and are usually correct! (Except when I'm wrong)(which I'm not) Link to comment Share on other sites More sharing options...
Ronnie Posted March 30, 2013 Share Posted March 30, 2013 thought you meant the panel... had to do an eng reset on on ATS recently - should be known as a rocket scientist reset! Link to comment Share on other sites More sharing options...
matthew.brough Posted March 30, 2013 Share Posted March 30, 2013 thought you meant the panel... had to do an eng reset on on ATS recently - should be known as a rocket scientist reset! You recovered from the trauma of having to do an ATS? www.securitywarehouse.co.uk/catalog/ Link to comment Share on other sites More sharing options...
sjsturner Posted March 30, 2013 Share Posted March 30, 2013 As matt looks down from his shire horse.... Link to comment Share on other sites More sharing options...
Ronnie Posted March 30, 2013 Share Posted March 30, 2013 it's wasn't that bad (last time i touched an ATS was a TX Maxx and was 6 years ago!) but it certainly isn't straight forward! Link to comment Share on other sites More sharing options...
matthew.brough Posted March 30, 2013 Share Posted March 30, 2013 it's wasn't that bad (last time i touched an ATS was a TX Maxx and was 6 years ago!) but it certainly isn't straight forward! The end user loves you to bits. They asked about the dreaded chime. It's only just been put into the latest software but without installing buzzers it's a waste of time as the RAS volume is so small. www.securitywarehouse.co.uk/catalog/ Link to comment Share on other sites More sharing options...
Ronnie Posted March 30, 2013 Share Posted March 30, 2013 can you do a link to the int siren? Link to comment Share on other sites More sharing options...
matthew.brough Posted March 30, 2013 Share Posted March 30, 2013 can you do a link to the int siren? Bit loud? Yes it is called macros. You would create an event flag called chime, put it in all the zones you want to chime, set a macro so when chime event flag went active to pulse the event flag of the siren for 1 second. www.securitywarehouse.co.uk/catalog/ Link to comment Share on other sites More sharing options...
Ronnie Posted March 30, 2013 Share Posted March 30, 2013 1 second isn't that long really, it prob takes half a second to actually get started and then dies off straight away. might be perfect. last last one was feckin loud anyway. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.