cagen Posted September 11, 2011 Share Posted September 11, 2011 Hi Everyone, I have been looking through this form for days now. Found some very useful topics that helped me with my Zone 9 tamper issue, but not as yet found anything that would help me wire the internal siren. I'm not sure of the make and model of the siren but it looks pretty basic. I've had the Accord XPc installed approx 15 years ago and had disabled the whole unit in a panic whilst I replaced our consumer unit last week. Everything else is wired now but the siren. Could anyone help me with wiring up the internal siren please? All I know is that the red, black, blue and white wires were used. I have included photos of the siren and alarm unit connections which I hope helps. Alarm Unit Connections Internal Siren Internal Siren Connections Much appreciate. Cagen Link to comment Share on other sites More sharing options...
james.wilson Posted September 11, 2011 Share Posted September 11, 2011 do you have an external bell? You only have the hold off connections wired it appears. You need a trigger and a tamper return to use it fully securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
cagen Posted September 12, 2011 Author Share Posted September 12, 2011 Hi James, Thanks for your reply. Yes we do have an external bell which works fine and I'm not sure where the hold off connections link to on the alarm unit. I was hoping someone could explain how to link the siren and alarm connections together. For example:- Siren ---> Alarm unit R- ---> AUX+, AUX-, KPAD, TRIG, LS H+ ---> AUX+, AUX-, KPAD, TRIG, LS H- ---> AUX+, AUX-, KPAD, TRIG, LS BAT- ---> AUX+, AUX-, KPAD, TRIG, LS BAT+ ---> AUX+, AUX-, KPAD, TRIG, LS RTN ---> AUX+, AUX-, KPAD, TRIG, LS From what I have read in the forums, the BAT- and BAT- connections on the siren wouldn't be used in my case. So that leaves the R-, H+, H- and RTN connections from the siren. Very much appreciated, Cagen Link to comment Share on other sites More sharing options...
james.wilson Posted September 13, 2011 Share Posted September 13, 2011 R- ...... Trig H+ ...... Aux + H- .......Aux - RTN ..... to the tamper return connector but not KPAD or LS in your above list. securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
cagen Posted September 15, 2011 Author Share Posted September 15, 2011 Hi James, That's FANTASTIC!.. I've been searching all week for at least some sort of diagram without success. Regarding the "The tamper return connector" Are you referring to the black and yellow connections shown in my first picture? Link to comment Share on other sites More sharing options...
Rulland Posted September 15, 2011 Share Posted September 15, 2011 No the 'RTN' connection in your third piccy he means-goes to panel tamp-R connection. Link to comment Share on other sites More sharing options...
Rulland Posted September 15, 2011 Share Posted September 15, 2011 Panel Bell Bell+ = Positive Supply/Hold Off=H+ Bell- =Trip/Signal Negative=R- Bell Tamp- =Negative Supply/Hold Off=H- Bell Tamp-R =Negative Tamper Return=RTN Strobe= Strobe Negative Signal=STRB Does that make it a bit easier? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.