Guest najtech Posted May 12, 2004 Share Posted May 12, 2004 Can someone forward me the programing details for the fai security gaurd or post how to find any info on it najtech@d2.net.au Quote Link to comment Share on other sites More sharing options...
Guest BoofHead Posted July 27, 2004 Share Posted July 27, 2004 (edited) Digging up an old thread here hehe, but I might luck out... I have just moved into a house with an SGII and have no users manual left here - and no key, just 2 controls with 3 buttons. The system hasnt been used for "x" amount of time and I am after a users manual, or any relevant info. I contacted the company 'NESS' who manufactured it, but they said as it was an exclusive for FAI they didn't ever have a users manual, FAI apparently did that seperately. Any help would be appreciated. Boof gavin22@tpg.com.au Edited July 27, 2004 by BoofHead Quote Link to comment Share on other sites More sharing options...
morph Posted July 27, 2004 Share Posted July 27, 2004 If you search the forums you will find a link in an earlier post for a site that has all the manuals on. Colin. Quote Link to comment Share on other sites More sharing options...
Guest ratchet Posted August 1, 2004 Share Posted August 1, 2004 I am also looking to program my FAI Security Guard. After may years the battery finally died and it has lost all its settings. If any one could send me a programming guide I would greatly appreciate it. I have search the forums but have only been able to turn up a user manual. Thanks, Tim Perth Western Australia Quote Link to comment Share on other sites More sharing options...
Guest dale Posted August 1, 2004 Share Posted August 1, 2004 Please read the post above yours on how to find the manual! Quote Link to comment Share on other sites More sharing options...
Guest voyager7 Posted September 3, 2004 Share Posted September 3, 2004 Hi all, I'm currently looking for the programming codes, i.e. how to program my SecurityGuard II. I've got the manual but doesn't tell much on programming. Help! Thanks, Bruno. Quote Link to comment Share on other sites More sharing options...
Guest scottp Posted October 24, 2004 Share Posted October 24, 2004 Hi, I am also looking for a programming manual for my FAI SGII alarm unit. The battery failed and I lost the program settings. The user manual does not cover this information. Any help would be greatly appreciated. Regards Paul Scott Brisbane, Australia I've replied to simon via personal email, and given him another source to chase on this.However if anyone knows how to do this then by all means post. Simmo B) 1186[/snapback] Quote Link to comment Share on other sites More sharing options...
Guest krash Posted October 25, 2004 Share Posted October 25, 2004 I have an FAI unit in the corner of the lounge and need to reomve it while we paint. Any info on how to remove the cover would be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
GREGTECH Posted February 13, 2017 Share Posted February 13, 2017 (edited) I was an installer on these FAI systems back in the 90's and I'm still servicing them today in Victoria, Australia. FAI systems were made by ness security FAI SGI (early 1990's) FAI SG2 (middle to late 1990's) FAI SG3 (2000 → 2006) - Voice model Guardpost (2007 → today ) Voice, GSM, Microphone, many other features. for any info contact me at: pm Edited February 13, 2017 by james.wilson contact Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted February 13, 2017 Share Posted February 13, 2017 Welcome GregTech, however the post you are replying to is over 13 years old virtually none of the original contributors are still registered with the board. Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.