Can someone forward me the programing details for the fai security gaurd

or post how to find any info on it

najtech@d2.net.au

Digging up an old thread here hehe, but I might luck out...

I have just moved into a house with an SGII and have no users manual left here - and no key, just 2 controls with 3 buttons.

The system hasnt been used for "x" amount of time and I am after a users manual, or any relevant info.

I contacted the company 'NESS' who manufactured it, but they said as it was an exclusive for FAI they didn't ever have a users manual, FAI apparently did that seperately.

Any help would be appreciated.

Boof

gavin22@tpg.com.au

Edited July 27, 200421 yr by BoofHead

If you search the forums you will find a link in an earlier post for a site that has all the manuals on.

Colin.

I am also looking to program my FAI Security Guard. After may years the battery finally died and it has lost all its settings. If any one could send me a programming guide I would greatly appreciate it. I have search the forums but have only been able to turn up a user manual.

Thanks,

Tim

Perth

Western Australia

Please read the post above yours on how to find the manual!

Hi all,

I'm currently looking for the programming codes, i.e. how to program my SecurityGuard II. I've got the manual but doesn't tell much on programming. Help!

Thanks,

Bruno.

Hi, I am also looking for a programming manual for my FAI SGII alarm unit. The battery failed and I lost the program settings. The user manual does not cover this information.

Any help would be greatly appreciated.

Regards Paul Scott

Brisbane, Australia

I've replied to simon via personal email, and given him another source to chase on this.

However if anyone knows how to do this then by all means post.

Simmo B)

1186[/snapback]

I have an FAI unit in the corner of the lounge and need to reomve it while we paint. Any info on how to remove the cover would be greatly appreciated.

I was an installer on these FAI systems back in the 90's and I'm still servicing them today in Victoria, Australia.

FAI systems were made by ness security

FAI SGI (early 1990's)
FAI SG2 (middle to late 1990's)
FAI SG3 (2000 → 2006) - Voice model
Guardpost (2007 → today ) Voice, GSM, Microphone, many other features.

for any info contact me at:
pm

 

 

 

 

 

Edited February 13, 20179 yr by james.wilson
contact

Welcome GregTech, however the post you are replying to is over 13 years old virtually none of the original contributors are still registered with the board.