Ive been on a couple of installs recently where if i knock the power off to the panel for one reason or another the panel loses its programing. I thought they had NVM chips?

Its a bit of a pain.

Am i not doing something i should be?

The M800 has an NVM and if its defaulting on power down either its been incorrectly fitted or has a major problem with itself

Its happend a couple of times. Was a problem on a larger system i installed.

Powering it down should not wipe it unless like i said its got a problem or is set up wrong.

Ive been on a couple of installs recently where if i knock the power off to the panel for one reason or another the panel loses its programing. I thought they had NVM chips?

Its a bit of a pain.

Am i not doing something i should be?

Rob

Once you have programmed the panel if you do not come out of engineering and downpower the system it will loose everything, believe me i learnt ehe hard way too. I always exit engineers and then go back in and downpower the system then on powering back up all data is held.

I always makes sure that he NVMS have been seated properly too, with all manufacturers products dont care who it is thats my policy now.

Next time try like i said mate you'll find that i keeps evertyhing apart formt eh time and date which it looses fro some reason.

don't let the power down in day mode (this is when it may lose its programming)

don't let the power down in day mode (this is when it may lose its programming)

lol, if thats the case what i crappy panel

As posted, lots of good features and I did esp like the plug on bb filter which fits on the digi within the panel - nice touch for those inspectorates!

I still think we'll wait. I-on40 out in may (been promised a demo in march) which is a hybrid panel like the homelink 55 - right up our street.

lol, if thats the case what i crappy panel

lol, we've fitted a few no probs usually pretty reliable give the menvier installer club a call they're usually pretty helpful